No that's right, but you wouldn't be able to just button in the extra sections, you would need to get the sewing machine out and extend all around the bottom too. Perhaps that's what you have in mind though?
Polish army tent - Lavvu on a budget ?
- Thread starter Shewie
- Start date
No that's right, but you wouldn't be able to just button in the extra sections, you would need to get the sewing machine out and extend all around the bottom too. Perhaps that's what you have in mind though?
According to Thompsons data sheet, waterseal is good for natural fabrics including cotton and canvas.
widu13
Bushcrafter (boy, I've got a lot to say!)
Yep you're right JB, just going on what others have said- something about a "new" chemical make up. Not checked myself and my tin is a couple of years old.
Why couldn't it be button on? as long as the internal skirt is higher then the external cone the button can be used all the way around to change between larger tent ( with skirt ) to normal smaller backpack size.
nah surely they're cut so that when taught the two ends will be in a straight line, i.e. it forms a 180 degree outline. If you put more than one together you'd need to create a circle with more than 360 degrees...
Or each of the sides would bulge out, creating a very weird shape, with 3 it would look a bit like a micky mouse head...
could work though
nah surely they're cut so that when taught the two ends will be in a straight line, i.e. it forms a 180 degree outline. If you put more than one together you'd need to create a circle with more than 360 degrees...
Or each of the sides would bulge out, creating a very weird shape, with 3 it would look a bit like a micky mouse head...
could work though
Right , To be clear I am on about using an EXTRA tent ( because its cheap good fabric ) cutting it up and sewing it a little to create an extra section of skirt that can be just button to the bottom of the Normal two man single unit to create a far larger floor space.
So cutting and sewing required -Yes Extra tent required-Yes Modified-Yes
Any clearer?
widu13
Bushcrafter (boy, I've got a lot to say!)
Nearly.. Just use the extra fabric to create a skirt which would extend the line of the angles.. a bell tent would give you inside more height , no extra floor space.
Think of the current tent as a Cone , now extend that cone up by 1/3rd again , larger floor space , greater height , abilty to change between tight 2 man tent to reasonable 3 person tent.
Does that make sense?
Yup, makes sense to me, raise it up off the floor in the cone shape, and fill in the space with more fabric, to make the cone reach the ground again
widu13
Bushcrafter (boy, I've got a lot to say!)
oh!!!!!!! i get it!!! wooops...totally special move by me there. that does sound like a good idea
Hi there Guys
Regarding waterproofing has anyone used the Grangers Fabsil camping proofer http://www.gooutdoors.co.uk/grangers-fabsil-5l-camping-proofer-p107747 if so has anyone got any tips on technique when waterproofing the tent?
Regarding waterproofing has anyone used the Grangers Fabsil camping proofer http://www.gooutdoors.co.uk/grangers-fabsil-5l-camping-proofer-p107747 if so has anyone got any tips on technique when waterproofing the tent?
This is a good tip:
http://www.bushcraftuk.com/forum/showpost.php?p=596138&postcount=261
I just brushed it in TBH and therefore not tried out the above method. I will do another time though. Brushed in worked fine but uses a fair bit.
HTH.
http://www.bushcraftuk.com/forum/showpost.php?p=596138&postcount=261
I just brushed it in TBH and therefore not tried out the above method. I will do another time though. Brushed in worked fine but uses a fair bit.
HTH.
Wet out is when the rain stops beading on the surface then starts to soak into the fabric, and or starts to come through to other side,when your in a cotton tent this can happen if its raining outside and you touch the fabric on the inside.
I might be being dim here. I've put it up in the garden and climbed into it. How on earth you button it up from the inside and manage to close the outside storm flap all the way down?! I can't see how without some comically Pythonesque move by waving my hands wildly outside using the arm slits!
Yep. That is difficult to say the least.
I usually just loop the loose eyelet over a tent peg and not bother closing the whole thing down. It seals it well enough (if you've done as most here and fastened 3 buttons down on the entry side) and I've used this set up a lot in the wet and cold. Makes for an easier late night exit for watering the foliage also.
It's on the back burner at the moment but I'll be putting a couple of patches of velcro on I think.
HTH.
I'd better start by saying I've not actually seen one of these lavvu's in the flesh, but I've been thinking about simple ways to extend them, as some people have said they're a bit small.
I reckon instead of trying to add fabric to the bottom the easiiest way would be to add a simple rectangle of tarp in the middle. I've seen, but can't find it a picture of of half a lavvu set up, so they'll obviously stand up like that.
The tarp would need buttons/holes to attach it, but that shouldn't be too hard to do. You'd button in one side completely and use the other side as a door. You could use a couple more poles or paddles or paracord to trees/landies/bystanders to support the loose flap and which would give a useful covered porch which could be open to your fire.
Here's a very rough MSPaint sketch which probably explains it all better.
I reckon instead of trying to add fabric to the bottom the easiiest way would be to add a simple rectangle of tarp in the middle. I've seen, but can't find it a picture of of half a lavvu set up, so they'll obviously stand up like that.
The tarp would need buttons/holes to attach it, but that shouldn't be too hard to do. You'd button in one side completely and use the other side as a door. You could use a couple more poles or paddles or paracord to trees/landies/bystanders to support the loose flap and which would give a useful covered porch which could be open to your fire.
Here's a very rough MSPaint sketch which probably explains it all better.
Last edited:
