I've never seen one quite like this. A simple but effective method of carry I would think:
Damn Yak Axe Holster - The Canadian Outdoor Equipment Co.
Damn Yak Axe Holster - The Canadian Outdoor Equipment Co.
Axe holster
- Thread starter bb07
- Start date
They lok good, but an SFA size axe(also my viking cegga) will fit in a maglite D cell belt holster.
Rob
Rob
BB07 Just say Chris the owner is a real nice guy, I wouldn't have any worries ordering him if I lived over there 
BB07 Just say Chris the owner is a real nice guy, I wouldn't have any worries ordering him if I lived over there
Yes, he is a great guy to deal with. I'm undecided whether I would actually use such a thing though, especially at that price:yikes:
Thats a tad dear, I could make one in an hour and will probably do just that. It's not much different from the utility belts you can buy on ebay 1950's surplus, except its not attached to the belt.
Actually, looking at this. It's just a leather belt cut down and reassembled. That sounds like the cheapest option.
Actually, looking at this. It's just a leather belt cut down and reassembled. That sounds like the cheapest option.
Silly price for 10 minutes work and about £2 material costs.
Really handy bit of kit though, I believe Angst made some very similar a few months back.
Shipping weight 400g? Are they adding lead to it too? lol
Really handy bit of kit though, I believe Angst made some very similar a few months back.
Shipping weight 400g? Are they adding lead to it too? lol
I liked the idea and looks of that and decided to make one for myself. I haven't had the chance to try it out, but it seems like it's going to work out pretty well. I think it took me about an hour or so to make and I already had all the materials on hand, so it didn't really cost much or require me to purchase anything. But, I think the total cost of the materials that I used would have come out to less than $3.
Last edited:
I'll be interested to hear how things go with the paracord retainer. It does look as though it might get in the way a bit...
I adapted my existing holster to add the cord retainer - but I used a leather thong and a leather cord grip (I like leather )
Scrap leather and 4 rivets had made the original holster, a thong and a piece of scrap made the retainer ... total outlay ... about £2!
I would say that the retainer is only needed if you are crossing seriously rough ground or stowing the axe for a good while - most of the time graviry is all you need to keep the axe in the holster...
)Scrap leather and 4 rivets had made the original holster, a thong and a piece of scrap made the retainer ... total outlay ... about £2!
I would say that the retainer is only needed if you are crossing seriously rough ground or stowing the axe for a good while - most of the time graviry is all you need to keep the axe in the holster...
Last edited:
+ makers over heads + makers profit + shipping from maker to shop + shop overheads + shop profit
I suspect it's more for keeping the axe head pointed in the proper direction (aft) rather than retaining it. As John Fenna said, gravity should retain it.
In that case if you scoop up the leather ring at the front (to look like a bishops mitre) it will do the same job.
Probably. I was thinking of something like the PR-24 holder on my duty belt. It's belt loop is similar to the one in this thread but the ring which holds the axe (or in my case the PR-24) is loded plastic with a raised nub to the outside of the ring to prevent the side handle from rotating.
That, to my mind, would provide a more elegant, simple solution. I think I might play with some leather over the weekend and see what I can come up with.
That has answered a question I've been pondering about = I'm going to make one. Thanks for the info. Nice work, Bradley and John.
Hey Gang, Great to see some axe holster in use. As well, super awesome to see some DIY like Bradley & John.
Also The keeper strap's job is to:
1. Keep the axe head in the direction you placed it in at.
2. Provide security from it falling out if in a serious Bushwhacking condition.
3. Lets you keep the Holster on the Axe while its off your belt.
It functions quite well with it off as well.
I originally had a leather strap and brass buckle, but the possibly of it ripping off made me change it. I also tried leather lace and a leather cord lock and was unimpressed with the strength of hold and again leather lace can snap (from experience w/ leather boot laces) So paracord was the solution and can withstand the possibility of snagging on a tree etc.
As for the cost, Southey has it bang on. Its there for people who want to buy it, but lots of pictures for people who want to make their own.
-Chris
Also The keeper strap's job is to:
1. Keep the axe head in the direction you placed it in at.
2. Provide security from it falling out if in a serious Bushwhacking condition.
3. Lets you keep the Holster on the Axe while its off your belt.
It functions quite well with it off as well.
I originally had a leather strap and brass buckle, but the possibly of it ripping off made me change it. I also tried leather lace and a leather cord lock and was unimpressed with the strength of hold and again leather lace can snap (from experience w/ leather boot laces) So paracord was the solution and can withstand the possibility of snagging on a tree etc.
As for the cost, Southey has it bang on. Its there for people who want to buy it, but lots of pictures for people who want to make their own.
-Chris
I've sent the URL to a mate and he'll probably want me to make him one.
No problem. But I'll keep the cost down by NOT using platinum or gold rivets - which surely has to be why the manufacturers charge so much for theirs!
No problem. But I'll keep the cost down by NOT using platinum or gold rivets - which surely has to be why the manufacturers charge so much for theirs!
