Karrimor Molle panel zips and clips to PLCE

  • Come along to the amazing Summer Moot (21st July - 2nd August), a festival of bushcrafting and camping in a beautiful woodland PLEASE CLICK HERE for more information.
found more info, it has a pocket on the back too. I can see this working on the front of bigger sacks sewn in place for endless options.

http://www.pri.uk.com/predator-molle-panel-plce.html

10 images underneath main

d4922139-904d-4708-b3b4-a28900e0c335_350x291.jpg


PMP_COY_BACK_clipped_rev_1.png


Predator-M-Panel-on-Sabre-45-(2).jpg
 
Last edited:
you could sew the whole panel on the front of the Bergen, next to the zips, so then you have the pouch behind to use, the molle straps for the minibar or zip on a PLCE side pouch.

I have messed with bergan before trying to get a side pouch on the front that was stable, seem like sticthing it is the best option other wise the things flap around.

Maybe its possible to use the female clips to span across the front and mate with the front top and bottom male clips for the side pouch, not sure if it would be stable enough though.

Ill create a pic to explain.
 
It is possible to zip 3 side pouches together and joint them to the 45litre rucksacks by the remaining 2 zips and all the original clips. On the issue bergan, the gap across the back is a bit bigger, and if you did this, it would reduce the internal space a bit.
 
what I am thinking is to put eyelets in the zip covers(white dots) on each side and then do the same to the back of the molle panel and then lace it on with paracord. that way you can still use the zips for a side pouch, the side release buckles and the molle is there underneath if you don't want the side pouch zipped. For me this pouch on the back would be for light kit, stuff to hand without opening up the main pouch and maybe a stuff bag for poncho with drain holes for when its wet.



 
Which is why you need the zips on the front

Good point :p

what I am thinking is to put eyelets in the zip covers(white dots) on each side and then do the same to the back of the molle panel and then lace it on with paracord

A bit straighter than your dots I hope :) The only problem I see with that, would be if its not tight and flush with the bergan it would leave it a bit saggy. It would save the problem of hand stitching zips on there own.
 
yes I agree, I found out early on that if something is not meant to go somewhere its difficult to make it work well if at all. The last thing I want from this panel is hassle and faff.

I got a Vulcan coming so I will order one of these on Friday and see what it looks like from there.
 
This thread got me thinking about putting zips on my army bergen again. Found some on ebay typing in PLCE zips and bought them. Save me faffing with an extra panel.

Sent from my KFOT using Tapatalk 2
 
you could sew the whole panel on the front of the Bergen, next to the zips, so then you have the pouch behind to use, the molle straps for the minibar or zip on a PLCE side pouch.

I have messed with bergan before trying to get a side pouch on the front that was stable, seem like sticthing it is the best option other wise the things flap around.

Ill create a pic to explain.

Did you ever do this? I'm looking for a new bergan, but am torn between a vulcan 1 which I could mod, or a vulcan II/crusader which would allow me to buy a compatible centurio as a daysack.
 
No haven't done this yet, is on my list to try soon. Didn't realise until I got the Vulcan that they don't have the small side release buckles like the PLCE and karrimor bags.
 
I realise now that i'd previously commented in this thread, so a bit of brain fade on my behalf L/P. Could the panel be glued on ?

Rob
 
Mine arrived today.

**Click the picture for a bigger version **

Here it is attached to my Vulcan:

Karrimor SF Predator MOLLE Panel Attachment (4).jpg

Close up:

Front mount zip.jpg

Rear compartment:

Rear compartment.jpg

Attached to sidepocket:

Side Mount.jpg
 
Last edited:
I do *love* how they put predator in the title as if it was designed for the predator, the Predator already have MOLLE on the front and sides, only thing it adds (for the predator) is the bellow pocket.

re: lostplanet's illustration, the way around that is loosen off entirely the front 4 PLCE clips on the sides and clip the pouch on that way, fits like a dream as thats how i add my predator omnipouch with the standard PLCE pockets on the sides, you can also fit 2 more male 25mm PLCE clips onto the existing straps.
 

BCUK Shop

We have a a number of knives, T-Shirts and other items for sale.

SHOP HERE