Whats the best grind for your ideal bushcraft knife?
- Thread starter British Red
- Start date
That's a fair point. You don't see many people obsessing over scissors or nail clippers. I've noticed a fair few in the camping community seem to hoard stoves and cookware though.I dunno why people get so excited about knives...
But I do have a theory of how it started.
Two opposing armies of men ( ...and women TeeDee.... P.F.J. reference.. ) milling around on, standing guard on borders arguing over which the two armies design of sword is the best for.. < insert term of bloodshed >
The Kopis vs the Falchion etc...
I can only imagine this how wars started.
This is some major thread drift now but... The story always goes that food is easily burnt in titanium cookware because it is so thin and conductive. So how much better would it be if they made it thicker?Cast Iron vs Titanium is the next new conflict flashpoint.
...er, ahem I mean with a scandi grind ; -)
From my perspective it’s just discussion, not warfare. It’s not even emotive. What do I know anyway?
A knife and a pot are probably 2 of the most important bits of Bushcraft kit. Both can be improvised but that takes time and resources that may be difficult to come by. So they are both worth consideration.
Sent from my iPhone using Tapatalk
A knife and a pot are probably 2 of the most important bits of Bushcraft kit. Both can be improvised but that takes time and resources that may be difficult to come by. So they are both worth consideration.
Sent from my iPhone using Tapatalk
Well for me it was watching First Blood when I was 12. It held a fascination that you could survive with that one tool. Then Crocodile Dundee reinforced that. I’ve always been fascinated by the survival knife since then, and I’m a collector. When my hobby became my job and the knife became a real thing I rely on, there was no going back. And I used to really love the reviews I used to do on here and BB. Now I have the time to do that again. And of course Poppy is in to the same stuff too. There’s no escape now.
Titanium is a lousy conductor of heat, really really poor. It is light and strong so appeals to the backpacker. It’s avoided for high output torches because it cooks the circuit inside but doesn’t release its heat, which makes it ideal for the high friction of super fast aeroplanes, or not burning ones lips on a mug of hot coffee. It is because it is a poor conductor of heat that food burns on it.
I do know your replies are not strongly emotional CM.
I just found others replies somewhat energetic and emotive.
But these things seem to come up every now and again for some passionate debating.
Metal cups in general. Who thought that was a good idea?
Sent from my iPhone using Tapatalk
Titanium ones are really ok on the lips even if nearly full. Steel, even the lovely traditional white and blue glazed are fraught with danger.
Lightweight single skin stainless, forget it. Copper cups haven’t even been invented for consuming hot liquids, but the metal is ace for cooking because it conducts so well.
Hmm ... a copper cup with very thin Ti lining anodized green, at least one would get comments! Nah, the lining would have to be bent on the lip so not to burn lips on the copper, gets difficult but think how expensive it would be, the next must have item.
Scandi for woodworking in a traditional small bushcraft blade, and convex for a multipurpose chopping, splitting and slicing big boi. The scandi shouldn't be too narrow, as it'll bite into wood too much rather than shave. Also, not all steels can handle a narrow scandi. For something like D2, it'll work better with a secondary edge or just a flat grind.
Definitely Scandi, it is also convenient to work with wood and, in general, this sharpening dulls more slowly
Funny, my personal experience is that edges of the same total included angle dull at the same rate regardless of how thick the blade is up beyond the edge. Concluding that Scandi grinds dull more slowly than flat grind or convex seems a bit like concluding that thick knives dull more slowly than thin knives. Any correlation is the result of other factors.
Well this thread was started in 2006, and in the 18 years since then I've gained some more experience.
I think I can now safely say that the answer to the original question is "It depends...".
I think I can now safely say that the answer to the original question is "It depends...".
Scandi for crafting bushes lol I mean woodwork without a doubt. Flat grind for fieldcraft or general purpose. I find thicker scandi’s harder to use so prefer no thicker that mora companion hd
What sort of grind does your sharpening system produce? If it is a sharp grind/edge, then that's my choice. If you can produce 3 different "grinds" well, then its all good.
Similar threads
