Hi all, been thinking about a cheap, simple stove for use in maybe a polish lavuu or entrance to a tarp or teepe.
I ground the lip of the lower bread tin which enables the two to clip together meaning no fixings. I used a jigsaw to cut the hole for the flue but elongated it slightly to allow for the angled vent which also holds it in place. The flue is a long can which held chocolate pretzels which even I couldn't eat. I cut a semi circle for the burn hole.
boiled a pan of water in reasonable time and kicks off a fair bit of heat.
obviously just a very basic start and needs developing....
was thinking rolled up rad reflector (just seen an ad for it at bandq) or similar to extend the flue with some mesh as a spark arrester. The flue will need a seal of some sort and maybe rig up a pole to support it when extended.
Anyway, some food for thought.....