a bit of advice needed please. i've just got a blow torch from ebay, the kind that connects to a big calor gas bottle via a rubber hose. the problem i have is that the hose on the torch is of a much smaller diameter than the hose that's currently on my regulator.
there's no way of getting the hose on the torch to fit the regulator directly, i've tried.
i don't want to cut the hose off of the torch and try fitting the larger diameter hose directly to the torch because i don't think it will work.
easiest solution i can think of is to join the two hoses together (the extra length will help too).
so, is there a fitting i can buy to do the job, and where can i get one?
cheers
stuart
p.s. it just occured to me that sizes might help, the smaller hose is (approx) 4mm internal 12mm external, the larger is 8mm internal 15mm external
there's no way of getting the hose on the torch to fit the regulator directly, i've tried.
i don't want to cut the hose off of the torch and try fitting the larger diameter hose directly to the torch because i don't think it will work.
easiest solution i can think of is to join the two hoses together (the extra length will help too).
so, is there a fitting i can buy to do the job, and where can i get one?
cheers
stuart
p.s. it just occured to me that sizes might help, the smaller hose is (approx) 4mm internal 12mm external, the larger is 8mm internal 15mm external