Lantern holder thingies for a lavvu pole

[Shewie]

Can someone point me in the right direction of the lantern holder posts on here, I know I've seen them before but can't find them right now.

I think it was just a bit of wire with some twists and bends here and there, relying on friction for the hold too I think.

I've got a pile of wire coathangers standing by

 

[Badger74]

No linkie, but.

All I use in my Re-enactment bell tent, is a tent peg bent 90 degrees and whipped to the pole with a bid of rope. Holds the oil lamp fine.

 

[Retired Member southey]

Yeah dude, just make a corkscrew with one end around the pole, and a projection at the top end to hold the lantern, of course I just drilled the Center pole three times in the center sections and use a peg

 

[markie*mark0]

like this fella?

 

[Dave]

I made quite a cool Rail, [copying the tentipi rail] out of four pieces of garden cane, four cut up pieces of plastic pipe, to join the cane together, and eight pieces of paracord...


http://www.proadventure.co.uk/acatalog/tentipi_drying_rail_set230.jpg

 

[SimonM]

I just tie a prussic loop around the pole and hang stuff on a mini carabiner.

if you are worried about the pole getting hot, drill the pole at the right height and stick a tent peg through the hole to hang the lantern off.

Simon

 

[Shewie]

Thanks all

like this fella?

That's what I had in mind cheers Mark, I might need something heavier than a coat hanger though looking at that pic

 

[treefrog]

http://www.tauntonleisure.com/snow-peak-lantern-hanger/p4667

 

[tartanferret]

Would a scaffold clamp work?

(based on you not having to carry the Lavvu that far of course)

I seem to remember you wanting some scaffolding for your canoe storage.

Is weight an issue? (sounds like a daft question for you)

cheers

 

[rik_uk3]

Markie has the right Idea, I made similar for my Juno 800.

 

[Shewie]

Would a scaffold clamp work?

(based on you not having to carry the Lavvu that far of course)

I seem to remember you wanting some scaffolding for your canoe storage.

Is weight an issue? (sounds like a daft question for you)

cheers

Still on the lookout for scaffolding

I'll have a look at the clamps but I think they might be a bit overkill, it's definitely an option though

 

[Thoth]

I've got one of those from Taunton Leisure, it works great in my Tentipi size 5, not quite a perfect fit on my size 9 Tentipi pole but still works fine. The 9 pole is 30mm I think.

 

[treefrog]

I've got one of those from Taunton Leisure, it works great in my Tentipi size 5, not quite a perfect fit on my size 9 Tentipi pole but still works fine. The 9 pole is 30mm I think.

Snowpeak make medium and large.

http://www.tamarackoutdoors.co.uk/PBSCProduct.asp?ItmID=9070238
http://www.tamarackoutdoors.co.uk/PBSCProduct.asp?ItmID=9070239