Anyone know where the cheapest place to get a Lansky Sharpening system is?
Anyone got one they want to sell?
Anyone got one they want to sell?
Last edited:
Lansky sharpener?
- Thread starter Whittler Kev
- Start date
-
Come along to the amazing Summer Moot (21st July - 2nd August), a festival of bushcrafting and camping in a beautiful woodland PLEASE CLICK HERE for more information.
Anyone know where the cheapest place to get a Lasky Sharpening system is?
Anyone got one they want to sell?
It's Lansky, not Lasky, ao if you search for that you might have better luck. They do several. I have this one:
http://www.lanskysharpeners.com/LKCPR.php
and I've used it very little. I bought it direct from Lansky at the recommendation of SOG's technical department, to sharpen a particular SOG product. The technical department apparently didn't realize that the Lansky products can't sharpen that particular SOG product because they can't reach the required edge angle, so I wasted my money. To be honest I think they're overpriced. I prefer to sharpen by hand. Obviously it takes a bit of practice but it's a useful skill to, er, hone. If you want a flat edge at exactly the angle that the Lansky tools will provide then that's fine, get one. I'd cheerfully sell you mine but it's packed in a box somewhere a thousand miles away and I don't know (nor do I care) if I'll ever see it again.
If you do let me know. I seemed to have missed the n in the title but not the body. 
I usually sharpen by hand but have nearly been convinced that when making a new one (as I often seem too) a Lansky seems to get the sharpening bevel a little better but until I've tried one I'll not know. Thats why I'm looking for either a second hand one, or if anyone knows where they may be on offer at the mo.
I usually sharpen by hand
but have nearly been convinced that when making a new one (as I often seem too) a Lansky seems to get the sharpening bevel a little better but until I've tried one I'll not know. Thats why I'm looking for either a second hand one, or if anyone knows where they may be on offer at the mo.
to be honest the lansky was one of the worst sharpening systems that I've ever owned. It does hold the angle reasonably well, as long as that angle is one that you want and your blade is only 2" long and you can get it to hold the blade stable enough and don't mind it getting scratched, oh and don't mind spending ages working at it coz the stone is so small.
If you are going to go for a sharpening jig system then the Edge Pro is the one to get. They are not cheap (especially the Pro version) but they are MUCH better all around!
If you are going to go for a sharpening jig system then the Edge Pro is the one to get. They are not cheap (especially the Pro version) but they are MUCH better all around!
Agree with Dave, the Lansky system seems like a good idea but in application very poor.
Bemused by their apparent popularity.
Bemused by their apparent popularity.
Glad to have my opinion confirmed by a professional.
Heck, they ARE expensive! Are they sold in the UK? There's a website at
http://www.edgepro.co.uk/
but all the Edge Pro kits on there are "out of stock, accepting back orders, normally stocked" which I have a hard time believing. Coupled with the "scam alert" on the USA site it makes me wonder.
Do you sell them Lurch? Don't get excited, I don't think I could justify the cost, but I wouldn't mind seeing one if there's one to look at.
Kev, why not experiment with something? To hold the blade at the required angle you could get a tilt and swivel vice something like this one (although I'd probably prefer something that screws down rather than using a vacuum):
http://www.maplin.co.uk/Module.aspx?ModuleNo=48769&C=SO&U=strat15
and mount a stone on a long bit of wood that can rest on a box or something behind the vice. You'd need a schoolkid's 20 pence protractor to measure the angle and probably need a bit of ingenuity to get everything to fit but you'd save quite a bit on these sharpening kits.
I've got one that I haven't used for a few years. I'll be happy to sell it to you. Pm me for a chat if you're still interested in one.
Got to say the Edge Pro inventor sells it well
http://video.google.com/videoplay?docid=6675496421093943658#
Then I saw the price.
Either Lanskys or stick to grinder and wet stones as I have previously done me thinks
http://video.google.com/videoplay?docid=6675496421093943658#
Then I saw the price.
Either Lanskys or stick to grinder and wet stones as I have previously done me thinks
the edge pros are really really good. I have the Pro model (got it years ago) and was one of the first to come into the UK courtesy of an american-run outdoors supplier who may not still be trading (he kept upsetting people in the knife& bushcraft worlds). On the plus sides for them they are very easy to use, extremely accurate (which is more than half way to being able to get a good edge), infinitely adjustable with angles and grits, with some modification can also do serrated and convex blades, has jigs to do chisels/planes/scissors, etc. On the down side there is obviously the high price (the pro models are individually handmade, but I think the Apex is small production runs), the small and expensive stones (the waterstones are only 5mm thick so wear fast) and the stones are hard to find in the UK (though you can improvise )
But, as suggested, there is a way of building your own try searching on BB for sharpening jigs and edgepro type systems. I seem to remember somebody built one that was a billed a s"edgepro on steroids" and was homemade. If you are feeling creative andf have rudimentary wood or metal working skills, the edgepro Pro is a doddle to make. I've been thinking of making one to hold larger stones, but haven't got around to it yet 
I soon realised that the stones were too pricey and too short lived, so I don't often use it these days. Instead I just learnt to sharpen freehand on stones as accurately as I possibly could. Now I can get my edges almost as uniform as the edgepro (when I'm concentrating that is) and it's faster and much cheaper.
)But, as suggested, there is a way of building your own
try searching on BB for sharpening jigs and edgepro type systems. I seem to remember somebody built one that was a billed a s"edgepro on steroids" and was homemade. If you are feeling creative andf have rudimentary wood or metal working skills, the edgepro Pro is a doddle to make. I've been thinking of making one to hold larger stones, but haven't got around to it yet I soon realised that the stones were too pricey and too short lived, so I don't often use it these days. Instead I just learnt to sharpen freehand on stones as accurately as I possibly could. Now I can get my edges almost as uniform as the edgepro (when I'm concentrating that is) and it's faster and much cheaper.
Last edited:
i have the lansky, i got it from someone 2ndhand on bcl, i get on with it ok but then i brought it to get my bevel right, i woldnt buy one full price though but its a reasonable bit of kit, the stones are a bit small though and it is limited in the length of knife it can accomodate
I tried the lansky and got a diamond set for a good price in the US. I did not get on well with it despite trying very hard I found that the sharpening was not uniform on the blade. I have tried to learn how to hand sharpen but have messed up a blade or 2 so have given up. I bought the spyderco system from Lurch and find it a far better system although it is equally expensive.
Similar threads
