Howdy Folks! It's that time of year where I want to unload the blades left after my last show 
Apart from some pattern welded blades (that I'll post up later) what you see below is ALL I have left after the show season. Some of these blades have been hanging about for way too long, so I've actually knocked money of these blades! Starting 2017 with 100% new stock
Some of the shiny blades and all of the laminated blades have some rust on them, hence the bigger reductions. Some of you may remember a little TV appearance with Dicky Strawbridge and his son James a couple of years ago. The two EN45 blades were made as part of that show, they both appeared in various states of finish on telly and I was assisted in their making by the grand mustachioed one!
Apologies for poor pictures, it was raining outside!
So here we go...
blades1 by buddknives,
blades2 by buddknives,
blades3 by buddknives, on Flickr
Vital Stats:
Edge length, Thickness at spine, Steel type, Price
1) 85mm, 3mm, O1, £35 NOW £25
2)
3)
4)
5)
6) 155mm, 3.5mm, EN45, £45 NOW £30
7) 215mm, 3.5mm, EN45, £60 NOW £45
Laminated blades
8) 70mm, 8mm, EN9 core with stainless sides £80 NOW £45 SPF
9)
10)
11)
Yakut blades (asymmetrically ground)
12)
13)
Ground and shiny
14)
15)
16)
Postage will be worked out based on the value of the blades that you buy. Totals under £50 will go out 1st class and cost £4, totals over £50 will be RMSD and £8
These are all sharp and have the temper drawn from the tangs so can be cut down easily enough should you wish. Obviously, due to UK laws, these are only available to persons of 18 years or over and with the bill payers permission, etc, etc.
thanks for looking folks!
Apart from some pattern welded blades (that I'll post up later) what you see below is ALL I have left after the show season. Some of these blades have been hanging about for way too long, so I've actually knocked money of these blades! Starting 2017 with 100% new stock
Some of the shiny blades and all of the laminated blades have some rust on them, hence the bigger reductions. Some of you may remember a little TV appearance with Dicky Strawbridge and his son James a couple of years ago. The two EN45 blades were made as part of that show, they both appeared in various states of finish on telly and I was assisted in their making by the grand mustachioed one!
Apologies for poor pictures, it was raining outside!
So here we go...
blades1 by buddknives, blades2 by buddknives, blades3 by buddknives, on FlickrVital Stats:
Edge length, Thickness at spine, Steel type, Price
1) 85mm, 3mm, O1, £35 NOW £25
2)
3)
4)
5)
6) 155mm, 3.5mm, EN45, £45 NOW £30
7) 215mm, 3.5mm, EN45, £60 NOW £45
Laminated blades
8) 70mm, 8mm, EN9 core with stainless sides £80 NOW £45 SPF
9)
10)
11)
Yakut blades (asymmetrically ground)
12)
13)
Ground and shiny
14)
15)
16)
Postage will be worked out based on the value of the blades that you buy. Totals under £50 will go out 1st class and cost £4, totals over £50 will be RMSD and £8
These are all sharp and have the temper drawn from the tangs so can be cut down easily enough should you wish. Obviously, due to UK laws, these are only available to persons of 18 years or over and with the bill payers permission, etc, etc.
thanks for looking folks!
Last edited:
