I wanted to try making a sharpening strop from Birch Polypore today, so my lad & I harvested this beast as the raw material for the project.
and set to work carving the wooden base plate and cutting the fungus to shape
then glued the two parts together, ok i cheated and took contact adhesive.
trimming the top of the fungus
and the finished result, brings the edge back wonderfully and has the added bonus of removing all the gunk that accumilates on the blade, tannins, sap etc.
Needless to say, my lad has taken full ownership of the strop already
, doubt if i will ever get to use it

and set to work carving the wooden base plate and cutting the fungus to shape





then glued the two parts together, ok i cheated and took contact adhesive.

trimming the top of the fungus

and the finished result, brings the edge back wonderfully and has the added bonus of removing all the gunk that accumilates on the blade, tannins, sap etc.


Needless to say, my lad has taken full ownership of the strop already

