Hi,
Just about to finish up this yew bow. Has lots of very "head scratching" lumps and bumps which makes tillering a bit of a nightmare.
Bits of wood like this are more a constant peace negotiation than a pre-defined project. All the way through you discover a knot/defect here that means you have to change the bows profile completely, or maybe even shorten the bow by inches if more serious. I am longing for a straight bit of timber for the next one.
But it gives me a lot of mental peace away from the money earning screen.
Its yew with the sapwood thinned, and about 68" length. Pulling at a guess as my scales are broken around 45lbs at 28 inch. Shoots well considering its character. Certainly a pretty bit of wood what ever the bow. Finished with 6 coats of Tru-oil. Not sure if it will get a handle or not yet, need to source thinner leather.
Just about to finish up this yew bow. Has lots of very "head scratching" lumps and bumps which makes tillering a bit of a nightmare.
Bits of wood like this are more a constant peace negotiation than a pre-defined project. All the way through you discover a knot/defect here that means you have to change the bows profile completely, or maybe even shorten the bow by inches if more serious. I am longing for a straight bit of timber for the next one.
But it gives me a lot of mental peace away from the money earning screen.
Its yew with the sapwood thinned, and about 68" length. Pulling at a guess as my scales are broken around 45lbs at 28 inch. Shoots well considering its character. Certainly a pretty bit of wood what ever the bow. Finished with 6 coats of Tru-oil. Not sure if it will get a handle or not yet, need to source thinner leather.
Last edited: