andyn
Bushcrafter (boy, I've got a lot to say!)
gregorach said:I've recently picked up one of the DD hammocks off ebay and an XXL basha from KT, so I've been out playing at the weekend...
I've cut the hammock tapes right down, tied them into loops, and attached karabiners and I use 2 5m x 50mm tapes to tie to trees. I tie the tree end using a slippery hitch (Evenk hitch, I believe), then pass the tape through the krab and tie it off using a mooring hitch. The mooring hitches can be adjusted to get the right tension / scoop, and then locked in place by pulling on the loop and the running side of tape. I did try using tautline hitches, but they don't seem to hold in tapes.
The mooring hitch is a great knot for this application, in my opinion. Easy to tie, easier to untie, slides easily in its sliding form but locks up so tight that it's easier to untie it than unlock it. Not putting fixed loops in your tapes keeps them available for other uses.
I keep looking at the falconers' knot, but I can't quite seem to get it right yet...
Hmm is this the same Gregorach of pclincs? If so....Hi
