Fallkniven DC3/DC4 Quality?
- Thread starter dwardo
- Start date
-
Come along to the amazing Summer Moot (21st July - 2nd August), a festival of bushcrafting and camping in a beautiful woodland PLEASE CLICK HERE for more information.
Just a quick update. I emailed Fallkniven last night with a photo of my damaged DC3 and by 7am this morning they'd replied requesting my address so they could send out a new one.
Very impressed with their customer service
.
Very impressed with their customer service
.
Last edited:
That's exactly what happened to my DC4 and within a week or two of buying it
so I sent it back.The thing is it had seen almost no use in that time , the bubble just appeared
.No problems so far with the new one though and had it a while now.
I had a DC3 and 4 for some time but found the metal side removed too much material and the ceramic side was ok I guess.
I use these now: http://www.bronzemoonoutdoors.co.uk/online-shop/gatco-arkansas-pocket-stone
I use these now: http://www.bronzemoonoutdoors.co.uk/online-shop/gatco-arkansas-pocket-stone
Sorry for the bump but I thought I'd add in my 2p.
I had the same problem with the "bumpy" and concave ceramic side. I didn't know that this issue was meant to settle itself out over time so got in touch with Fallkniven and after some emails back and forth they said send it in. Sent it recorded international on Monday morning, got a new one through Saturday morning.. Couldn't be happier. Admittedly I might have got to it a day early since I work for RM and picked it up as soon as it came to the depot but still, I'm chuffed.
To anyone doubting the quality of this product, there customer service sure is great!
Also, just an observation, the new DC4 sent to me is the new variety (they told me to wait to send it in until I did as they would be receiving them then) and the ceramic side seems MUCH nicer than before.
Also, this has been bugging me for agggges!! .. What is that hole for in the diamond side?!
I had the same problem with the "bumpy" and concave ceramic side. I didn't know that this issue was meant to settle itself out over time so got in touch with Fallkniven and after some emails back and forth they said send it in. Sent it recorded international on Monday morning, got a new one through Saturday morning.. Couldn't be happier. Admittedly I might have got to it a day early since I work for RM and picked it up as soon as it came to the depot but still, I'm chuffed.
To anyone doubting the quality of this product, there customer service sure is great!
Also, just an observation, the new DC4 sent to me is the new variety (they told me to wait to send it in until I did as they would be receiving them then) and the ceramic side seems MUCH nicer than before.
Also, this has been bugging me for agggges!! .. What is that hole for in the diamond side?!
I think the hole is for a lanyard, as you can buy them seperatly, The ceramic = c4(BOOM) and the diamond slabs= D4, either a lanyard or a pin to hold in place while you use it maybe?, but as there is no hole in the c4 not much use now.
I see, I didn't realise you could get them separately.. makes total sense now. 
I thought I was missing out on some amazing knife sharpening technique..
I thought I was missing out on some amazing knife sharpening technique..
!
I got one a few months ago and have been using it ever since, on my Woodlore course a few days ago I showed it to the instructor who thought it looked very
dented and uneven on the diamond side. I had thought the same when I first got it, it looked like it was second hand or something but I had assumed that was just
the way they all were, after all, it sharpened my knife. I might start looking into getting this fixed or sending it back to the woodlore shop. Or maybe get a good
waterstone.
outdoorpaddy
dented and uneven on the diamond side. I had thought the same when I first got it, it looked like it was second hand or something but I had assumed that was just
the way they all were, after all, it sharpened my knife. I might start looking into getting this fixed or sending it back to the woodlore shop. Or maybe get a good
waterstone.
outdoorpaddy
I've had two DC4s. The first one was brilliant - the bumps on the ceramic side never bothered me as I was able to get a shaving sharp edge with it and as far as I could see they didn't bother me. Anyway, I tried sharpening an axe with it and the diamonds came off the diamond side so I contacted fallkniven and they sent me a replacement. I didn't really use it for a few months but now I've noticed that the diamond side isn't completely flat and the diamonds haven't lasted nearly half as long as the first one!
I was tempted by the spyderco double stuff but most prices seem to be double that of the DC4.
I was tempted by the spyderco double stuff but most prices seem to be double that of the DC4.
I have been using my replacment DC4 for a while now and there is a marked difference between it and my older DC4.
I had to glue the diamond side back on which is no big deal but the main difference is the quality of the diamond side, it is no where near as good as the old one.
The diamond side seems to crumble at the edges an has a much more cumbly feel about it generaly. The ceramic side also seems to be less well finished and chips much easier.
This will be my last DC4.
I had to glue the diamond side back on which is no big deal but the main difference is the quality of the diamond side, it is no where near as good as the old one.
The diamond side seems to crumble at the edges an has a much more cumbly feel about it generaly. The ceramic side also seems to be less well finished and chips much easier.
This will be my last DC4.
I would second the DMT Diafolds, the red/green is perfect for touch ups, followed by a loaded strop if wanted, the red/blue will restore a damaged edge if it needs a bit more work.
Good quality, easy to hold and use and very effective. I never bother with my DC4 or sharpmaker these days to be honest.
Cheers, Paul
Good quality, easy to hold and use and very effective. I never bother with my DC4 or sharpmaker these days to be honest.
Cheers, Paul
Similar threads
