Basically, I started by drilling the bowl with a Forstner bit. I think I used a 1" bit on this one. Then I used the bandsaw at work to cut out the basic shape.
Then I enlarged the hole with the my new spoon knives and also used some small flexcut gouges to nibble around in there. I used a Warren carving knife to carve the handle and round the base of the bowl. I sanded it down to remove the carving divets on the bowl and used a wood block to sand the flats on the handle. Once I got everything sanded smooth, I used scrapers to scrape it to a final finish. Put a coat of mineral oil on it and done.
Got a chunk of walnut here that may have the makin's for another.