This axe hanger was made from 2mm & 3mm thick full grain shoulder veg tan leather. It comes with a double brass press stud belt loop and has a solid brass D ring.
All stich holes were punched with a diamond awl and then the saddle stitching was made with natural coloured No18 linen thread that I heavily waxed with bee's wax. It is also stamped with my maker's mark.![Cool :cool: :cool:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
It was dyed with 4 coats of medium brown dye and the edges were dyed and Edge Koted too. The edges were heavily burnished to a smooth finish. Finally, I finished it off with 3 coats of RM Williams Saddle Dressing which gives a nice shine and waterproof finish.
NOW SOLD
ATB
Craeg
All stich holes were punched with a diamond awl and then the saddle stitching was made with natural coloured No18 linen thread that I heavily waxed with bee's wax. It is also stamped with my maker's mark.
It was dyed with 4 coats of medium brown dye and the edges were dyed and Edge Koted too. The edges were heavily burnished to a smooth finish. Finally, I finished it off with 3 coats of RM Williams Saddle Dressing which gives a nice shine and waterproof finish.
![P4192974low-1.jpg](http://i51.photobucket.com/albums/f371/craeg67/My%20Crafts/Leathercraft/P4192974low-1.jpg)
NOW SOLD
ATB
Craeg
Last edited: