After looking at Whittler Kev's thread, here http://www.bushcraftuk.com/forum/showthread.php?t=136030 and reading Macaroons comments on said thread, I thought I'd have a go at making one.
Knocked this up this morning, 10" x 11.5" scrap of 12mm WBP ply, drilled, cut, sanded and given a couple of coats of Walnut oil. A little over an hour to make. It's a bit rough and ready but it works very well. Thanks for looking.
PS the large block is a piece of 3x3 par.
Knocked this up this morning, 10" x 11.5" scrap of 12mm WBP ply, drilled, cut, sanded and given a couple of coats of Walnut oil. A little over an hour to make. It's a bit rough and ready but it works very well. Thanks for looking.
![Lap Vice 017.jpg Lap Vice 017.jpg](https://bushcraftuk.com/community/data/attachments/25/25941-034b34677c043e6f5e2665a5a3e7d3b1.jpg)
![Lap Vice 018.jpg Lap Vice 018.jpg](https://bushcraftuk.com/community/data/attachments/25/25942-e74183cbba23a46889404c2859b57c62.jpg)
![Lap Vice 019.jpg Lap Vice 019.jpg](https://bushcraftuk.com/community/data/attachments/25/25943-cee94d35fdd6c58b9390f0ed7212b17e.jpg)
PS the large block is a piece of 3x3 par.