O1 Blades and kits

[FGYT]

===============================================

Sorry you ARE legally allowed to Own and use
Knives BUT I cannot legally sell them to you
Please do not try or be offended if asked for ID
Or are refused sale if you have No ID proof of age
This applies even if you live outside UK​

<<<<<<Age showing in your Profile / side bar is a good start


Click here for clarification : Criminal Justice Act 1988 Sect 141 A - England and Wales

All Prices include 1st class postage in UK
USA and Europe/Scandinavia add £2
PM for other overseas charged at cost


Paypal prefered add £2 per £30 etc
Cheque and Postal orders accepted




a few blades I have managed to fit in around orders


all are from 3.4mm (unless stated) rolled German O1 steel Laser cut and heat treated in Sheffield, Ground and finished in Dorset.

DLC (Dorset Little Carver) Sloydd style small blade


Blade Length 60mm
Zero Scandi ground = 25 deg
Rounded Spine
tang fits a 7mm hole.


3 off £15 ea (3 sold) more will be available soon or PM me if you cant wait




DSK ( Dorset Survival Knife)


Over all length = 170mm
Scandi ground = 25deg (unless stated)
Finish = Level 2 220gt and polish
Finish = Level 1 as rolled sides and polish


Right 4 off = L1 £25 (1 sold)
left 2 off = L2 £27
left 1 off = L2 subdued £27 ( subdued is a patina and will wear)
left 1 off = L1 Full flat £27


*** liner and Pin Kit = £3 ea (price only available if bought with blade)
Pin holes max 5mm
Rear lanyard hole max 8mm Tube (hole size is 18mm)
Center Hole Max 8mm Tube (hole size is 10mm)


DPK small ( Dorset PuKko style)


blade thickness = 2.5mm
Over all length = 163mm
Scandi ground = 25deg (unless stated)
Finish = Level 2 220gt and polish


1 off = £30
*** Pin and liner kit = £3 extra (price only available if bought with blade)




DNK small ( Dorset NessmuK style)


blade thickness = 3.4mm
Over all length = 193mm
Scandi ground = 25deg (unless stated)
Finish = Level 1 as rolled sides and polish


1 off = £35 (SOLD) more available soon or just ask


*** Pin and liner kit = £3 extra (price only available if bought with blade)






(***)
Liner and Pin kits consist of a pair of vulcanised liner material cut to suit the handle size of the blade
current options are
Brick Red
Black


Pins are Brass and can be soild or Tube for any hole one for each hole supplied as 1" pre cut lengths


Sizes shown are the Max diameter available for the kit smaller size can be requested within the kit price (stock dependent)
Center holes and Rear hole can usually be larger but thats POA stock dependent etc)


Sample picture

 

[mountainm]

Can't recommend these more - scary sharp.

 

[Johnnyboy1971]

Seen some of these and there ace. Where is mine anyway?

 

[forestwalker]

What is the blade lenght of the nessmuk? Quite interested...

 

[FGYT]

What is the blade lenght of the nessmuk? Quite interested...

its teh smallest one here

the blade is slightly bigger than a full size woodlore but with a 3 finger handle

 

[Biker]

Put me down for one of your DLCs please. PM to follow.

 

[forestwalker]

its teh smallest one here


the blade is slightly bigger than a full size woodlore but with a 3 finger handle

Hmm, the blade is ok, but the handle is to dinky for my hands and a full size job (i.e. moose). What is the price for the mediums (when you have them in stock)?

 

[FGYT]

Hmm, the blade is ok, but the handle is to dinky for my hands and a full size job (i.e. moose). What is the price for the mediums (when you have them in stock)?

HI yes the small is a 3finger neck knife size, just the Nessy does have a large blade even when scaled down

the mediums are £40 with a scandi grind and i can do one if you like i dont usually make the Nessy baldes for stock but had this one left over from the WG

ATB

Duncan

 

[Retired Member southey]

I had one of the small nessy blades, it really does punch way above its size, there is a lot of blade to play with, I have size ten hands(glove size) and the handle never felt to small even though in a standard grip it was in my first three fingers, brilliant little big knife! Very sad that i had to sell it last week but new toys must be funded

 

[forestwalker]

I had one of the small nessy blades, it really does punch way above its size, there is a lot of blade to play with, I have size ten hands(glove size) and the handle never felt to small even though in a standard grip it was in my first three fingers, brilliant little big knife! Very sad that i had to sell it last week but new toys must be funded

The problem is that then when playing chav on a Saturday night with a moose there is likely to be quite a bit of blood around, and it might also take a while. So in such cases I want to have a full size handle to make the work easier and safer. Also, butchering may take place at temps around 0 C, in unheated buildings. Not the time to play around with minimal grips on knives.

 

[Retired Member southey]

Fair enough chap, Though I have used it butcher half a red deer in the garden, not in winter but it was a little nippy

 

[wasteoid]

LDC for me to please.

PM to follow when I get out of the mad house.

Chris

 

[forestwalker]

Fair enough chap, Though I have used it butcher half a red deer in the garden, not in winter but it was a little nippy

I'm sure it can be done, but I prefer a bigger handle (and the bigger blade for the larger cuts?).

As to winter, no, winter is not 0 C, not around here...

 

[Black Sheep]

Duncan,

Your PM in box is full

 

[nunzionuk]

Right .. can any one point me in the way of a guide all the youtube guides I have found need a bench/belt sander, this is one thing I don't have access to.

 

[Retired Member southey]

Right .. can any one point me in the way of a guide all the youtube guides I have found need a bench/belt sander, this is one thing I don't have access to.

guide for what chap? for Ducans knives?

 

[nunzionuk]

A guide to making a handle For one of Duncan's lovely blades.

 

[Retired Member southey]

Cool beans matey, heres one way using hand tools

 

[nunzionuk]

That is perfect! thank you

 

[Retired Member southey]

Word holmes! I live to serve