The knife is made from an old carbon steel deck knife and has a white oak handle.
The handle is attached with epoxy resin and two 4mm brass pins the wrapped in jute and bees waxed.
I annealed the blade first then drilled the holes,heated it up in my forge and curved the blade then water quenched it.
I then used a blow torch to temper it to a light straw.
It has two cutting edges.
The handle is attached with epoxy resin and two 4mm brass pins the wrapped in jute and bees waxed.
I annealed the blade first then drilled the holes,heated it up in my forge and curved the blade then water quenched it.
I then used a blow torch to temper it to a light straw.
It has two cutting edges.
Last edited: