I'm looking at getting a GB axe (or two).
Any advice on which one to get would be much appreciated.
Thanks
Chris
Any advice on which one to get would be much appreciated.
Thanks
Chris
Gransfors axes
- Thread starter chris chris
- Start date
-
Come along to the amazing Summer Moot (21st July - 2nd August), a festival of bushcrafting and camping in a beautiful woodland PLEASE CLICK HERE for more information.
i have one, and its the only one i have tried.. the wildlife hatchet is perfect to my eye, for my needs that is.
I like edged tools, collect knives ect.. i have looked for an exquse to buy my self another axe but i have not yet done so, i dont want to buy one i wont use and the Wildlife hatchet does everything is need!
that said i know some people prefer the Small Forest Axe as it gives the option of two handed use.. finding the wildlife too small!
it depends on what you will be doing i guess!
I like edged tools, collect knives ect.. i have looked for an exquse to buy my self another axe but i have not yet done so, i dont want to buy one i wont use and the Wildlife hatchet does everything is need!
that said i know some people prefer the Small Forest Axe as it gives the option of two handed use.. finding the wildlife too small!
it depends on what you will be doing i guess!
Like the good reverend says.......it very much depends on what you want to do with it. Personally I prefer the small forest axe......Its small enought to fit in a rucksack, Light enough to use one handed and a helve long enough to get two hands on it when needed! If you just intend to split wood for the fire or the odd carving project then, as tomtom says, the wildlife hachet will serve your need admirably! I'd advise you to avoid the larger axes e.g. Scandinavian forest axe, etc..., unless of course your an experienced axe user!
I have a Hunters and the Mini. I like both. The mini is really nice for backpacking where weight is a major consideration. We were hiking on North Fork Mt and on that trip we had to carry all of the water we would use. Rather than a khukuri, or my 1 lb Reeves axe, on that trip I took the mini. It worked well with stuff up to about 3.5 inches but you must use sort of a whipping action since it's so light.
First pic is GB Hunters, Firestone axe, Norlund and GB Mini. Second is GB mini in hand for scale.
Just for the maximum amount of confustion, here's a Lee Reeves hatchet which is 12" and weighs about a pound and an ounce or so, and a Ragweed Forge hatchet which is 14" and 15oz as I recall.
First pic is GB Hunters, Firestone axe, Norlund and GB Mini. Second is GB mini in hand for scale.
Just for the maximum amount of confustion, here's a Lee Reeves hatchet which is 12" and weighs about a pound and an ounce or so, and a Ragweed Forge hatchet which is 14" and 15oz as I recall.
And as beautiful as the Lee Reeves is....and it is.....if you order one now, you may just get it in time for Xmas!
I'd go for a Small Forest personally. I have a Scandanavian Forest which is around 6" longer, but it can be a little awkward one handed - great for reach when limbing though.
I could blather on about other choices (Roselli and Wetterlings spring to mind), but, first axe, you wont go far wrong with an SFA.
Holowdweller, do you have a link for the Firestone and / or the Ragweed forge please?
Thanks - Red
I'd go for a Small Forest personally. I have a Scandanavian Forest which is around 6" longer, but it can be a little awkward one handed - great for reach when limbing though.
I could blather on about other choices (Roselli and Wetterlings spring to mind), but, first axe, you wont go far wrong with an SFA.
Holowdweller, do you have a link for the Firestone and / or the Ragweed forge please?
Thanks - Red
I got the wildlife hatchet recently havent used it a great deal yet, but Im starting to prefer it to my sfa, so far it done everything Ive asked of it and its more portable. I carry a folding saw along with me to make for its lack of chopping power (compared to the sfa at least)
British Red said:
Red,
I think the Reeves took me 8 months to get. I believe Ragnars site is www.ragweedforge.com and I'd reccomend his axes. They are cast but light and have a scarey sharp edge.
These guys have the Firestone
http://www.discountcutlery.net/en-us/dept_21728.html
This is the place that makes them
http://www.mcgowanmfg.com/category.cfm?Category=18
I would say the Firestone has an edge that is a bit too steep for me I really need to re profile it. It is also stainless steel and the whole axe is somewhat heavy. I believe the cutting ability is somewhere between a GB mini and Wildlife Hatchet although I believe it would split wood better than either.
I've just got back from Celle, the next big town to where I am here in Germany, and by sheer luck came across a camping shop that sells GB axes!! I was amazed when I saw the Wildlife Hatchet (by MM) for 50 and the SFA (by LK I think) for 90, and got real excited.
But then I picked the SFA up and had a good look at it. I am hoping this was just a bad example of a SFA as the head was twisted!! I looked from the tip of the handle to the head of the axe with the cutting edge facing upwards, and the blade veered off to the right at the furthest end of the head, so the head was not running true with the handle.
Also, the grain of the handle turned in a clockwise direction towards the head, and not slightly, but by a great amount. I'm not sure if the finish should have been like it was at the bottom of the handle, the wood rippled, which looked like it would afford more grip in the wet, but it always looked to me to be a well finished handle in pictures I've seen. This put me right off of buying that particular axe and I asked if they had another example of it. They didn't but could order more if I wanted.
Can anyone shed more light on whether this is the norm for GB axes or if this is just a bad example of this axe?
But then I picked the SFA up and had a good look at it. I am hoping this was just a bad example of a SFA as the head was twisted!! I looked from the tip of the handle to the head of the axe with the cutting edge facing upwards, and the blade veered off to the right at the furthest end of the head, so the head was not running true with the handle.
Also, the grain of the handle turned in a clockwise direction towards the head, and not slightly, but by a great amount. I'm not sure if the finish should have been like it was at the bottom of the handle, the wood rippled, which looked like it would afford more grip in the wet, but it always looked to me to be a well finished handle in pictures I've seen. This put me right off of buying that particular axe and I asked if they had another example of it. They didn't but could order more if I wanted.
Can anyone shed more light on whether this is the norm for GB axes or if this is just a bad example of this axe?
I wouls day bad example, the majoprity of Gransfors are straight, the odd one is a little off centre but never really bad. Wetterlings seem to have more of a problem with the being off centre.
In fact, I've just been on your site Outdoorcode, and the axe wasn't a SFA but I think it is the Hunters axe. The poll seemed to be very rounded and nicely polished up, and this will explain the rippled handle. My bad, but they were the first GB axes I'd actually held in my hands and gazed upon lovingly with my own four eyes!
I will be back in UK in a few months, and as my folks live in Chapeltown, the Sheffield version, I think I'll pop in and pick one up from you if I may. I'll end up spending a forune in your shop I'm sure, so it may be toward the end of my proposed holiday so that she doesn't give me misery for the whole holiday!!!
I will be back in UK in a few months, and as my folks live in Chapeltown, the Sheffield version, I think I'll pop in and pick one up from you if I may. I'll end up spending a forune in your shop I'm sure, so it may be toward the end of my proposed holiday so that she doesn't give me misery for the whole holiday!!!
Now my old scout leader told me that axe's were left or right handed, thats why the head seems to twist. looking down the handle towards the head if the cutting edge goes to the right then its made for a righty and if it goes to the left then its made for a lefty.
Well I think thats right was bout 20 years ago.
Well I think thats right was bout 20 years ago.
