Gen 1 and Gen 2 Juniper Box Stoves - With or Without Disassembly

[Wook]

Below is the advert for 2 different versions of my firebox.

They are laser cut from stainless steel and finished by hand. The external dimensions when assembled are (LxWxH) are 26cm x 21cm x 21cm and it weighs approximately 1.5kg.

They will burn pretty much anything. I have successfully run them on wood, charcoal, peat and house coal. They do not scorch the ground underneath, but are large enough that you get the feel of a campfire. One thing I personally have found them very useful for is allowing me to have a "campfire" at campsites that do not permit them.

The Generation 1 version does not break apart, and is locked into its assembled configuration by permanently bending locking tabs on the bottom.
This version of the stove costs £25 including paypal and postage within the UK.
Current Gen 1 Assembled Stoves in Stock: Out of Stock

The Generation 2 version does break apart, and has had its locking tabs punched through for R-Clips.
This version of the stove costs £30 including paypal and postage within the UK.
Current Gen 2 Assembled Stoves in Stock: Out of Stock

 

[Rod Paradise]

I've just bought a takedown Juniper Box Stove & it's a cracking bit of kit, not had much chance to play but it's well made & solid.

 

[cowboy]

Hey wook, I don't suppose you could send me a PM with where to get the R clips from. Iv just this second drilled my holes to make mine a break down.

For anyone looking at getting one off these. Don't hessitate! They are a great bit of kit!. Iv used mine loads since wook made me one and its still going strong

 

[Moosemap]

Hi Wook,

still very interested, how much more would it be shipped to Austria/Europe? And do you enclose the R clips?

Regards,
Heinz

 

[Wook]

Gen 2 stoves are now temporarily out of stock pending the usual.

I'll make some more when I have a moment.

Gen 1 stoves still available.

 

[Wook]

Stock figures updated.

I'll really try and get a few more put together this week. I normally assemble them in the garden, and it hasn't stopped raining!

 

[Wook]

I finally found a moment to assemble another Generation 2 takedown stove, so here's a stock update for you.

The Gen 1 stoves are now out of stock. I have the parts to make more, but since the takedown version seems more popular I wont bother unless someone expresses a particular interest.

 

[Elen Sentier]

Very nice looking piece of kit ... next year, will buy one

 

[Wook]

That shouldn't be a problem Elen, although please bear in mind the supply of these stoves is finite.

I had a production run of an initial 50 made, and have found I cannot sell them at a profit. So once I sell these there will be no more.

I've not been out to the shed to count the unassembled stoves I have left, but it is less than 20.

 

[Wook]

I still have one Gen 2 version of my stove in stock.

Any takers?

Maybe too close to Christmas eh? But think of how much a bushcrafter would appreciate one under the tree

 

[big_d2008]

I will take it off your hands mate message me with payment details.

 

[Wook]

Sold pending the usual. That's me out of stock again, but I've got a 75% assembled one lying around somewhere. I'll see if I can get that put together.

 

[Leezo]

I'll take it off you mate please

 

[Leezo]

Sold pending the usual. That's me out of stock again, but I've got a 75% assembled one lying around somewhere. I'll see if I can get that put together.

I'll take it off you mate please

Sent you a message

 

[Wook]

Stock figures updated.

 

[Wook]

I still have 1 assembled stove in the cupboard.

 

[Marco1981]

Hi, do you still make these? Interested in a gen1.

 

[Wook]

I do indeed although they have been put on the back burner while I work on my PhD.

The only assembled one I have right now is a Gen 2 Juniper Box stove with disassembly.


DSCF6546 by Abrasive Scotsman, on Flickr

DSCF6545 by Abrasive Scotsman, on Flickr

DSCF6547 by Abrasive Scotsman, on Flickr

 

[Marco1981]

PM on its way bud!

 

[Wook]

Sold pending the usual.

Once everything clears I'll lock this thread up and create a new ad if and when I assemble any more. This will be the last one for the forseeable future though.