Imagedude Bushcrafter (boy, I've got a lot to say!) Feb 24, 2011 2,005 46 Gwynedd Jun 22, 2014 #1 I'm going to make a set of bowl carving adzes but first I need some info on the edge profile. Are they sharpened on the inner or outer edge or both?
I'm going to make a set of bowl carving adzes but first I need some info on the edge profile. Are they sharpened on the inner or outer edge or both?
crosslandkelly Full Member Jun 9, 2009 26,445 2,366 67 North West London Jun 22, 2014 #2 My bowl Adze is sharpened on the inside. Hope these pics help. Attachments adze 001.jpg 48.7 KB · Views: 11
FGYT Maker Feb 8, 2004 3,919 10 52 Cranborne Chase Dorset www.dorsetwoodlandblades.co.uk Jun 22, 2014 #3 for bowls I usually sharpen the outside its easier to scoop a curve as it turns
M mrcharly Bushcrafter (boy, I've got a lot to say!) Jan 25, 2011 3,257 45 North Yorkshire, UK Jun 22, 2014 #4 I have one sharpened on the inside; it still works for scooping, but does limit the radius a bit.
crosslandkelly Full Member Jun 9, 2009 26,445 2,366 67 North West London Jun 23, 2014 #5 FGYT said: for bowls I usually sharpen the outside its easier to scoop a curve as it turns Click to expand... I must try that, cheers.
FGYT said: for bowls I usually sharpen the outside its easier to scoop a curve as it turns Click to expand... I must try that, cheers.
ozzy1977 Full Member Jan 10, 2006 8,558 3 47 Henley Jul 2, 2014 #6 Mine is ground on the inside, I prefer it that way as I find it easier to take finer cuts