*The* Gift-It-On Thread
- Thread starter g4ghb
- Start date
-
BushMoot: Come along to the amazing Summer Moot 31st July - 5th August (extended Moot : 27th July - 8th August), a festival of bushcrafting and camping in a beautiful woodland PLEASE CLICK HERE for more information.
Globetrotter, I'm very interested in your awl/stitcher if it's still available! This year is my year of making and repairing. And I'm aiming to create some basic winter moccasins this year.
I'll find something to offer this evening.
Many thanks
I'll find something to offer this evening.
Many thanks
Lol, I'm not so vain to care mate, only joshin.
Sent from my MotoG3 using Tapatalk
Don't feel pressured into giving away heirlooms mate, give it a week, I'm sure someone will bite. If not, have a think of something else that may be of use to someone.
As has been said many many times, the giot can be daunting. But patience and some courtesy from the would be giftees should always be present.
(saying that, I was sooo glad when my fire lighting kit went as fast as it did lool)
PM sentThanks for that mate, it's no pressure, I've tons of excess kit lol..... Slowly trimming it down to what l really want and need. Cheers
Sent from my MotoG3 using Tapatalk
Stainless steel coffee canister. One piece construction, no welds,seams or sharp corners. Seals airtight without need for any rubber gasket.
Holds 800ml, weighs 235g. I've used an identical one for a couple of years as a small billy-can and the lid doubles up nicely as a cup/bowl.
Good nesting capabilities and will hold a large soup can inside as a second pot or three boiled sweet tins.
Holds 800ml, weighs 235g. I've used an identical one for a couple of years as a small billy-can and the lid doubles up nicely as a cup/bowl.
Good nesting capabilities and will hold a large soup can inside as a second pot or three boiled sweet tins.
The container is roughly 105mm in diameter and has a flat spot on the base a little over 60mm across. It's a sod to photograph so it shows up clearly.
Naturally it works fine as a hanging pot over a fire or standing on a small coke-can type meths stove for bimble brews. If somebody with an Ikea hobo-stove could post some measurements it may also drop inside one of those nicely,
Will not sit at all on an Esbit hexi-stove and unstable on common gas burners with three pot support arms. In backyard experiments I worked around the problem by simply putting three tent pegs or sticks around it.
PS got a box full of goodies so don't dismay at my surplus gear just yet
Naturally it works fine as a hanging pot over a fire or standing on a small coke-can type meths stove for bimble brews. If somebody with an Ikea hobo-stove could post some measurements it may also drop inside one of those nicely,
Will not sit at all on an Esbit hexi-stove and unstable on common gas burners with three pot support arms. In backyard experiments I worked around the problem by simply putting three tent pegs or sticks around it.
PS got a box full of goodies so don't dismay at my surplus gear just yet
Last edited:
Similar threads
