wanted Silver Rod/Tube

[FGYT]

any body here got any Silver rod 3-4mm dia and Tube 6mm

i need some for handle pins and lanyard tube so only need short bits

3 bits of rod and one bit of the tube 25mm long

ive looked in my metals box and only have sheet

will accept Nickle silver as a second choice
and can bore 6mm rod if ness

ATB

Duncan

 

[Longstrider]

Not asure where you would find silver lanyard tube, but if 1/8" rod is any use to you, Attleborough Accessories do it.
http://www.attacc.com/acatalog/KNIFE_MAKING_ACCESSORIES.html

 

[FGYT]

thanks didnt see that before but was only looking at Mosaic pins last time i was on Attleborough

thanks again

Duncan

 

[British Red]

I ahve some ally tube thats about 6mm if thats any use?

Red

 

[FGYT]

I ahve some ally tube thats about 6mm if thats any use?

Red

Rather try and Stick to Slilver if i can so it all matches

However I may be back if no luck Cheers

ATB

Duncan

 

[cccc]

any body here got any Silver rod 3-4mm dia and Tube 6mm

i need some for handle pins and lanyard tube so only need short bits

3 bits of rod and one bit of the tube 25mm long

Duncan

Duncan

Are you still looking for silver ? Cooksons are pretty good, I will have a look this evening in my box to see what I have. I know I have some sheet but I might also have some rod if thats useful.

Cheers

c

 

[FGYT]

Just an Update Ive got the Rod and Tube now in Sirling Silver

Thanks to all for the Offers By PM and on Here for offcuts


ATB

Duncan