I have managed to complete a couple of knives that i have had laying around for a long time.
There are others on the go too so hopefully i will have some more to offer in the not too distant future.
The first is a full tang by Eklund.
Dimensions are as follows:
190 x 25 x 3,3 mm. The steel is AEB-L ( a stainless as i understand.)The scales are snakewood and they are fixed with slow cure epoxy, a brasspin and a 4 mm brass lanyard.
The sheath is a scandi style belt sheath in black.
The blade needs a final clean at the moment ( as you'll see in the pics) and the sheath needs greasing and buffing before it goes out( this is a couple of days in actual time)
I noticed there is a small scratch on the opposite side of the blade ( not pictured) but as the blade is mirrow finished i can't see this mattering... a days use and it'll be scratched anyway. I have also noticed a glue line ( visible in the pics) along the upper scales
.
Again purely cosmetic.
Price for this one is 110 delivered. Paypal accepted please add 3.4%) other methods of payment can be discussed.
The second one is a small damascus full tang.
Blade made by Grand Levitt (idaho)
Blade made of 125 layers 1094 and 15N20 steel There is NO MILD STEEL IN THIS MIX!
Scales made from stab curly birch.
Sheath is at present without strap as it can likely be used as a neck knife as well as a small belt knife.
Fixed with 2 brass pins and a brass thong hole.
Asking 90 for this delivered, paypal preferred ( add 3.4 %) other methods can be discussed.
The ukpk is not for sale but for scale only.
Thanks for looking!
There are others on the go too so hopefully i will have some more to offer in the not too distant future.
The first is a full tang by Eklund.
Dimensions are as follows:
190 x 25 x 3,3 mm. The steel is AEB-L ( a stainless as i understand.)The scales are snakewood and they are fixed with slow cure epoxy, a brasspin and a 4 mm brass lanyard.
The sheath is a scandi style belt sheath in black.
The blade needs a final clean at the moment ( as you'll see in the pics) and the sheath needs greasing and buffing before it goes out( this is a couple of days in actual time)
I noticed there is a small scratch on the opposite side of the blade ( not pictured) but as the blade is mirrow finished i can't see this mattering... a days use and it'll be scratched anyway. I have also noticed a glue line ( visible in the pics) along the upper scales

Again purely cosmetic.
Price for this one is 110 delivered. Paypal accepted please add 3.4%) other methods of payment can be discussed.



The second one is a small damascus full tang.
Blade made by Grand Levitt (idaho)
Blade made of 125 layers 1094 and 15N20 steel There is NO MILD STEEL IN THIS MIX!
Scales made from stab curly birch.
Sheath is at present without strap as it can likely be used as a neck knife as well as a small belt knife.
Fixed with 2 brass pins and a brass thong hole.
Asking 90 for this delivered, paypal preferred ( add 3.4 %) other methods can be discussed.


The ukpk is not for sale but for scale only.
Thanks for looking!
