*The* Gift-It-On Thread

[richos36]

Up for offer, a bushcraft mystery parcel. It won't disapoint.
Or
A small unbranded friction folder. Takes and holds a decent edge.


Don't seem to be able to upload a photo from my laptop
.

if you fancy doing a double give away i will take the friction folder ?

 

[crosslandkelly]

i will take the friction folder ?

The friction folder is yours.
PM me with your details.

 

[Broch]

Derrr.... how is that going to work? Are we going to run with two people offering stuff at the same time? It got confusing enough at times before

 

[gra_farmer]

Derrr.... how is that going to work? Are we going to run with two people offering stuff at the same time? It got confusing enough at times before

I am still waiting to hear back, so might still be only one item?

 

[crosslandkelly]

The offer was quite simple, mystery parcel OR friction folder.

 

[gra_farmer]

The offer was quite simple, mystery parcel OR friction folder.

I put my hand up first for the mystery parcel before richos36 replied, so I take it that is going to be sent?

 

[crosslandkelly]

Right my mistake guys, I missed @gra_farmer post as it had skipped a page, Sorry about that @richos36 .
The gift goes to the first claim and that was gra_farmer.
Sorry about the confusion.

 

[richos36]

No worries i didn't want the mystery parcel never owned a friction folder so thats why i replied
sorry for any confusion shaun

 

[gra_farmer]

I'll have a dig about and see what is to hand?

I'll have something up for grabs soon.

 

[gra_farmer]

Apologies, between family and work, I have not been able to have a dig around for different stuff, so to keep the thread going, please find my offering below.

Kevlar bowdrill cord, around 1m in length, sown loop.

I'll have this up for a few days, and if no takers, I'll put something else up.

 

[stevec]

I'll take that please if I may. I offer a candle tin thingy, see the last post in the candle tin thread

 

[stevec]

Well I liked this thread and decided to have a try myself. I had an altoids tin and some thin stainless wire. First off I needed to remove some of the polymer coating on the tin, then I had a quick go with some wet and dry before a bit of brasso. Wilko taper candles, 2 quid a pack of 10, the tin takes 1 and half candles, with about an inch left over for other usage. I had fun and it only took 2 or 3 hours.View attachment 55350 View attachment 55351 View attachment 55352 View attachment 55353 View attachment 55354

See this for pictures

 

[gra_farmer]

I'll take that please if I may. I offer a candle tin thingy, see the last post in the candle tin thread

It's yours @stevec, pm me your address details and I'll pop it in the post today.

 

[stevec]

It's yours @stevec, pm me your address details and I'll pop it in the post today.

arrived today, cheers mate.

 

[stevec]

Ok, candle tin isn't doing it, so I'll try modern lighting instead. On offer, a nitecore tini, it's been rattling around in my bedside cabinet with a bunch of my knives, but not used apart from that, but don't expect it to be in bnib condition. In addition I'll offer a usb powered led area light, low power, it has 3 RGB LEDs, you can select red blue or green light. It pulls 60-75mA so will run for a long time on a battery bank. And the final item in the bag is a little length of cyflect tape which is a glow and retroreflective tape. Made by cylume.

Let me know if you're interested

 

[Whittler Kev]

wow. just re found the thread, pleased its still going after all these years

 

[Wandering Fred]

If the Nitecore Tini is up for grabs, I'll take it.

 

[stevec]

PM me your address, I'll stick it all in a jiffy bag

 

[stevec]

It went in the post just now, hopefully it will be with you soon

 

[Wandering Fred]

Arrived today, thanks!
Will put something up tomorrow (with pictures if I can work out how to do it!)