Just bought a "Windshield for Alcohol Stoves" off ebay, from mofishx1_Camping_Supply - under £6 delivered
(The smaller of the two options)
With about 5mm trimmed with scissors off the top (while flat obviously) and three well positioned nicks around the top and bottom (equally spaced), I have managed to get the resulting shield inside the Tatonka stand with the top of the shield 1mm below the pan rests while giving all round wind shielding.
Used it quite a few times this week in Derbyshire with great success, speeds up a boil considerably..
and...... it will hug the inside of the billy can for storage/transit almost invisibly
Note
If you have a "non stick coated Billy Can" slip the shield into a piece of a plastic from an A4 ducument wallet to stop it scratching the finnish,
Jeff
(The smaller of the two options)
With about 5mm trimmed with scissors off the top (while flat obviously) and three well positioned nicks around the top and bottom (equally spaced), I have managed to get the resulting shield inside the Tatonka stand with the top of the shield 1mm below the pan rests while giving all round wind shielding.
Used it quite a few times this week in Derbyshire with great success, speeds up a boil considerably..
and...... it will hug the inside of the billy can for storage/transit almost invisibly
Note
If you have a "non stick coated Billy Can" slip the shield into a piece of a plastic from an A4 ducument wallet to stop it scratching the finnish,
Jeff
