Swiss issue boiler- field test

MickG

Forager
Feb 2, 2009
127
0
78
Blackwood South Wales
I have had one for some time now
I made a meths burner from 2x red bull small cans and enlarged the square entry hole to make it easier to insert and remove
it should not weaken it to much as you are only heating 500ml of water or soup
Make a lid out of ally as you do for a crusader or look for a large lid that you can cut off a tin of dog food or tin fruit that will fit [use a side cutter and leave the rim on]
Mick
 

harryhaller

Settler
Dec 3, 2008
530
0
Bruxelles, Belgium
Done the mods - not very pretty, but works well:)

3434719602_c84ab02e32.jpg


3434716914_b4a83bdf2b.jpg


Here with the tatonka meths burner - the wire around it is for putting it in and pulling it out - the burner is very shiny and slippery.

3433907777_b43bb9a094.jpg


3433904399_5e492e1737.jpg


And of course the finale: Water's boiling! :)

3433906761_05bbbc7692.jpg
 

QDanT

Settler
Mar 16, 2006
933
5
Yorkshire England
Just playing about this is a 28mm copper pipe end cap with 10ml meths in:-
endcap.jpg

(just to prove you can't see meths burning in daylight it's actually lit).I drop an empty Tuna can upside down into the Volcano and you can still place the copper cap in through the square hole at the bottom.This lifts it nearer the cup and out of drafts.
stovesendcap.jpg

Results, Swiss Volcano 10 ml meths 250 ml water 8 min. 30 sec to a high rolling boil and burnt for another 1 min 30 sec
Crusader cup and cooker 10 ml meths 250 ml water burnt for 12 min small bubbles rising but no rolling boil
cheers all Danny
 

Mastino

Settler
Mar 8, 2006
651
1
61
Netherlands

Hetzen

Forager
Feb 5, 2009
186
0
West London
Love the Meta-50. Mine's pretty battered, so didn't mind making a few mods on it, the latest being a stainless steel balti dish for a few quid as the frying pan, on top of cutting out the notcocher cradle to get my hobo inside.
 

Magentus

Settler
Oct 1, 2008
919
39
West Midlands
QDanT where did you get the cup lid??


Sorry to butt in on this one, but here is a pic of my swiss cooker with a lid made from a large tinned fruit top and a wooden knob. Not as nice looking as QDanT's but it works. I'm thinking of taking the knob off, and putting a small magnet on it to remove the hot lid when the water boils.

http://www.flickr.com/photos/11980281@N03/3449320797/

I love this cooker - I bought it for my daughter and we use it loads when we're out and about.

Magentus
 

QDanT

Settler
Mar 16, 2006
933
5
Yorkshire England
QDanT where did you get the cup lid??
not from here but this is what it's off -


http://cgi.ebay.co.uk/Gelert-0-8-Litre-Kettle_W0QQitemZ400049094343QQcmdZViewItemQQptZUK_SportingGoods_Camping_CookingSupplies_ET?hash=item400049094343&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A0|293%3A1|294%3A50

a Gelert 0.8 Litre Kettle though it's more just sat on rather than a tight fit don't forget a bit of aluminium foil works
cheers Danny
 

BCUK Shop

We have a a number of knives, T-Shirts and other items for sale.

SHOP HERE