Hi all,
I am selling this small knife I made recently. First time I've sold anything on BCUK so hopefully I've followed the process correctly!
I heat treated/ tempered then measured on my rockwell tester after each cycle. If interested these are the readings: after HT (810c)=68HRc then 1st temper @195c for 2hrs= 62HRc then a final temper @ 210c for 2hrs to achieve 59HRc (last photo below - although not the greatest shows the results).
The overall length is 165mm, blade is 55mm and finished with a polish surface.
Scales are white corian with red liners. Pins/lanyard hole are alloy.
No makers mark yet as my stamp has yet to arrive from the engravers.
I have made 2 sheaths for it. One is kydex and the other veg tan leather - reason for 2 is that I prefer carrying kydex in the field and like leather for appearance so I made both lol.
Looking for £35 which incl P&P.
Any questions just fire away
Hope I have added the photos correctly! ...
Cheers,
Rob
I am selling this small knife I made recently. First time I've sold anything on BCUK so hopefully I've followed the process correctly!
I heat treated/ tempered then measured on my rockwell tester after each cycle. If interested these are the readings: after HT (810c)=68HRc then 1st temper @195c for 2hrs= 62HRc then a final temper @ 210c for 2hrs to achieve 59HRc (last photo below - although not the greatest shows the results).
The overall length is 165mm, blade is 55mm and finished with a polish surface.
Scales are white corian with red liners. Pins/lanyard hole are alloy.
No makers mark yet as my stamp has yet to arrive from the engravers.
I have made 2 sheaths for it. One is kydex and the other veg tan leather - reason for 2 is that I prefer carrying kydex in the field and like leather for appearance so I made both lol.
Looking for £35 which incl P&P.
Any questions just fire away
Hope I have added the photos correctly! ...
Cheers,
Rob
