hi lads and lasses i have made one of my multi carry systems for a falkniven f1.
this sheath has been dyed with firbings black dye, the inside of the sheath has had a coat of fiebings tan kote to aid with waterproofness, and detriment to the blade, and the out side has had a liberal coat of fiebing carnauba cream, and leather shean.
it has a spring loaded clasp to aid with deployment, and to keep it out the way when drawing the knife.
this system is molle and pals webbing compatible, it can be carried vertical, horizontal, in the small of your back, attached to your pack with the multi carry strap on the back, it also has a dangler system for normal carry, there are to points at the bottom for attaching to your leg.
it has a removable dc3 pouch, and all the system can be taken apart by the use of chicago screws, if you wish to use the sheath on its own.
the firesteel loop will fit the army fire steel model.
it has my makers mark on the sheath, thanks to kerne.
004 by lucky_lee, on Flickr
003 by lucky_lee, on Flickr
020 by lucky_lee, on Flickr
017 by lucky_lee, on Flickr
015 by lucky_lee, on Flickr
013 by lucky_lee, on Flickr
008 by lucky_lee, on Flickr
016 by lucky_lee, on Flickr
023 by lucky_lee, on Flickr
i would like 62.50 for this please, that includes postage sighned for, but not paypal fee's.
thank you.
this sheath has been dyed with firbings black dye, the inside of the sheath has had a coat of fiebings tan kote to aid with waterproofness, and detriment to the blade, and the out side has had a liberal coat of fiebing carnauba cream, and leather shean.
it has a spring loaded clasp to aid with deployment, and to keep it out the way when drawing the knife.
this system is molle and pals webbing compatible, it can be carried vertical, horizontal, in the small of your back, attached to your pack with the multi carry strap on the back, it also has a dangler system for normal carry, there are to points at the bottom for attaching to your leg.
it has a removable dc3 pouch, and all the system can be taken apart by the use of chicago screws, if you wish to use the sheath on its own.
the firesteel loop will fit the army fire steel model.
it has my makers mark on the sheath, thanks to kerne.
004 by lucky_lee, on Flickr
003 by lucky_lee, on Flickr
020 by lucky_lee, on Flickr
017 by lucky_lee, on Flickr
015 by lucky_lee, on Flickr
013 by lucky_lee, on Flickr
008 by lucky_lee, on Flickr
016 by lucky_lee, on Flickr
023 by lucky_lee, on Flickr
i would like 62.50 for this please, that includes postage sighned for, but not paypal fee's.
thank you.
Last edited: