Frontier Stoves

[Kerne]

Anyone come across these?

http://www.campingsolutions.co.uk/campingsolutionsfrontierstove.html

They seem like a good idea at a not too exorbitant price. A lot cheaper for your tentipi than the nordic ones. Any got one? Opinions?

 

[Gailainne]

Have a look on SOTP, a few of those guys have them

 

[Kerne]

Bumping this after a long gap as I've just seen that Bushcraft magazine are doing an offer on them - anybody got one?

 

[slowworm]

I'd also be interested to hear what people think of them. What's the Bushcraft magazine offer Kerne?

I've found a review on SotP, here: http://www.songofthepaddle.co.uk/forum/showthread.php?28258-Frontier-Stove-Review.

 

[Kerne]

I'd also be interested to hear what people think of them. What's the Bushcraft magazine offer Kerne?

I've found a review on SotP, here: http://www.songofthepaddle.co.uk/forum/showthread.php?28258-Frontier-Stove-Review.

£112 ish plus £8 postage. Thanks for the link - looks good and could heat my workshop as well.

 

[rik_uk3]

He was taking 'make an offer' of £85 or £89 on ebay, ring up and make an offer.

 

[Kerne]

Bullet bitten. Just ordered one. Reckon it will be my workshop stove and my car camping stove of choice in the future.

I'll try and put a treview together sometime (although the SOTP review is pretty good.)
Can't wait...

 

[Snarf]

If you could do a review with some pics, that would be ace.

I'm gonna get religated to the garage soon when i get a workspace set up and will need some warmth.

ATB

 

[rik_uk3]

Bullet bitten. Just ordered one. Reckon it will be my workshop stove and my car camping stove of choice in the future.

I'll try and put a treview together sometime (although the SOTP review is pretty good.)
Can't wait...

Did you phone and make an offer like the SOTP guy did?

 

[Nonsuch]

I've got one. Substantial and very nicely made. The problem is creating a long enough flue pipe and then a pipe baffle so that it will work with a tentipi, so I've never used mine. Too lazy to get around to sorting it out. They were much cheaper at one point.

If anyone come sup with a good solution for an extended flue I would be very interested

NS

 

[Kerne]

Did you phone and make an offer like the SOTP guy did?

No. That was in the early days when they sold via eBay. I went through the Bushcraft mag offer - saved about £18.

 

[rik_uk3]

If he's giving £18 off from a mag he'll take an offer and I know a man who might just do that (not me, I got the norgie army one).

 

[WeThePeoplexfbm]

abit lik the old cast iron wood stove from back ni the day ^^

 

[treadlightly]

Here's mine, in action at the weekend. Very pleased with it so far. Easy to control with just the damper and the door position to adjust the draw. The tripod style legs make it very stable on uneven ground and build quality seems good.

[/IMG]

 

[greenshooots]

i have one good bit of kit extra flue can be sourced from car exhaust maker on ebay thread of who on song of the paddle

greenshoots

 

[Rychard]

greenshoots do you know the dia of the flue and can you put the link to the sone of the padle as i cannot find it many thanks

 

[greenshooots]

here you go

http://www.songofthepaddle.co.uk/forum/showthread.php?22613-My-new-Frontier-wood-stove-from-Ebay.

greenshoots

 

[greenshooots]

No they are not a stock part I had to buy a 1 metre lenght of 2.25" pipe to cover the 2 400mm sections and also bought a small reducer to cover the 150mm section. All that I asked for was one end of each section to be expanded so it would fit over 2.25" pipe.

Haven't lit it yet with the new sections but don't expect any problems as they are a good fit.

I called them and talked to them before I bought anything their number is 01922 623372.

this is what I bought:

http://cgi.ebay.co.uk/2-25-57mm-T304...item3efd9ed0ad

http://cgi.ebay.co.uk/2-Way-exhaust-...item414dfb9341

These are the instructions I gave along with my Paypal payment:

2.25" pipe 2 sections 40cm one end on each section enlarged to fit over 2.25" pipe.
2.25" pipe 15cm one end enlarged to fit over 2.25" pipe.

The total cost including postage and packing was £29.89

the above was taken from original thread

greenshoots

 

[Partickpebbles]

No they are not a stock part I had to buy a 1 metre lenght of 2.25" pipe to cover the 2 400mm sections and also bought a small reducer to cover the 150mm section. All that I asked for was one end of each section to be expanded so it would fit over 2.25" pipe.

Haven't lit it yet with the new sections but don't expect any problems as they are a good fit.

I called them and talked to them before I bought anything their number is 01922 623372.

this is what I bought:

http://cgi.ebay.co.uk/2-25-57mm-T304...item3efd9ed0ad

http://cgi.ebay.co.uk/2-Way-exhaust-...item414dfb9341

These are the instructions I gave along with my Paypal payment:

2.25" pipe 2 sections 40cm one end on each section enlarged to fit over 2.25" pipe.
2.25" pipe 15cm one end enlarged to fit over 2.25" pipe.

The total cost including postage and packing was £29.89

the above was taken from original thread

greenshoots

The links dont work mate....

 

[Rychard]

thanks greenshoots i need a biger dia 3 1/4inch but will phone them as a walsall number only 5 miles from me maybe able to help many thanks