Flint and Steel fire lighting kits (Dragon's Breath) for sale
- Thread starter John Fenna
- Start date
Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
NEW STOCK NOW AVAILABLE - 12 SETS JUST MADE! Down to 10 sets already!
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
NEW STOCK NOW AVAILABLE - 12 SETS JUST MADE! Down to 10 sets already!
Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
NEW STOCK NOW AVAILABLE - 3 sets left!
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
NEW STOCK NOW AVAILABLE - 3 sets left!
Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
All gone.... Looking for steel NOW!
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
All gone.... Looking for steel NOW!
If it is anything like the one I saw at the Midlands meet, you have a bargain Sapper
Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
NEW STOCK JUST MADE! 9 SETS AVAILABLE
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
NEW STOCK JUST MADE! 9 SETS AVAILABLE
I got mine in the week. I set fire to a tissue, just to test it, while I was still at work. Thought it best to stop when our Health and Safety Auditor turned up for a surprise inspection.
Took it out at the weekend with some of our Explorers and had a play. Set a bit of charcloth glowing for the lad getting the fire started, but he was too slow on the uptake.
I'll need a bit more practice to master the kit but it works just fine. Thanks very much. :You_Rock_
I have tried flint and old files, without success. I'll have to dig out the bits of flint I tried and compare with those you shaped. What sort of proportion of files are not suitable? Once I have the technique sussed I'm tempted try teaching some of the Scouts, so I might unashamedley copy the kit for them.
Took it out at the weekend with some of our Explorers and had a play. Set a bit of charcloth glowing for the lad getting the fire started, but he was too slow on the uptake.
I'll need a bit more practice to master the kit but it works just fine. Thanks very much. :You_Rock_
I have tried flint and old files, without success. I'll have to dig out the bits of flint I tried and compare with those you shaped. What sort of proportion of files are not suitable? Once I have the technique sussed I'm tempted try teaching some of the Scouts, so I might unashamedley copy the kit for them.
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
NEW STOCK JUST MADE! 6 SETS AVAILABLE
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
NEW STOCK JUST MADE! 6 SETS AVAILABLE
Figured I'd give a bump for this Won't I feel silly if there aren't any left!
Really excellent bit of kit, this! I'd been put off for a long time by flint and steel because I expected it to be generally quite hellish getting anything to work, so if his is putting you off, don't let it! The birch polypore supplied takes the ember brilliantly, and the charcloth takes a spark like nothing on earth! There were a couple times where I was sure that a spark was too small and barely hit the charcloth and soon it'd be glowing happily. Flint and steel also excellent, no problem at all getting good sparks from it, hotter sparks than I expected too.
And for John, John is a gent to buy from and ships fast, so don't worry about that either
Pete
Won't I feel silly if there aren't any left! Really excellent bit of kit, this! I'd been put off for a long time by flint and steel because I expected it to be generally quite hellish getting anything to work, so if his is putting you off, don't let it! The birch polypore supplied takes the ember brilliantly, and the charcloth takes a spark like nothing on earth! There were a couple times where I was sure that a spark was too small and barely hit the charcloth and soon it'd be glowing happily. Flint and steel also excellent, no problem at all getting good sparks from it, hotter sparks than I expected too.
And for John, John is a gent to buy from and ships fast, so don't worry about that either
Pete
"Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits
These are proving very popular! And going fast!
Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.
Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
NEW STOCK JUST MADE! 2 SETS AVAILABLE
1 "special" mounted in Antler available - no extra cost!
Similar threads
