Custom Kydex Sheath ?

[Forest fella]

Hi, Anyone know of a UK Maker of Kydex Sheaths for the Condor bushcraft parang. If so what sort of price am I looking at.
cheer's

 

[mikehill]

One of the best is no1jimmypie on Instagram

 

[C_Claycomb]

You could make something yourself.

I used polycarbonate from RS Components and some 4-40 and 10-32 screws I had lying around to make this.
. by Last Scratch, on Flickr
I am pretty sure that a simpler job could have been done with binding post screws (used for leather work and folder binding)

Blade retention is by friction, there is a welt of plastic around the perimeter, and near the tip I heated the panel and pushed it in against the blade with a rounded object.

 

[robevs73]

I saw a condor parang sheath made from old car dash board, it's basically grey kydex. The guy had done a really good job of it, i'm assuming that a kydex sheath of that size would not be cheap to commission, at least £50. If you decided to make your own aluminium pop rivets and washers would work just fine aswell, you could also paint them black if you want to be fussy. A one off job you could use old kipmat sandwiched between two planks for the forming .

 

[Trencakey]

'If you decided to make your own aluminium pop rivets and washers would work just fine as well, you could also paint them black if you want to be fussy.'
Canoe shops sell black rivets,I think they're anodised,maybe be harder wearing than paint ?
https://www.ebay.co.uk/i/332366408442?chn=ps&var=541370606910