Okay I took the splash and bought maker status so that I could offer this here as well as BB and hopefully for use in the future too!
Its 4mm thick O1 and were looking at 8.3 inches total length with 3.8 inches of that being blade. The tang has two holes for snug fitting 1/4 inch pins and an 8mm lanyard hole.
Currently finished to 320 grit, but on request I could polish it up to a mirror finish (no extra charge).
Im going to say £30 for it for a quick sale. That includes 1st class, recorded signed for delivery. Go for it!
Pins and a lanyard tube to fit can be supplied for an extra £5 (Both are brass and the pins are mosaic)
If you have any questions then please don't hesitate to ask!
SOLD
Alec
Its 4mm thick O1 and were looking at 8.3 inches total length with 3.8 inches of that being blade. The tang has two holes for snug fitting 1/4 inch pins and an 8mm lanyard hole.
Currently finished to 320 grit, but on request I could polish it up to a mirror finish (no extra charge).
Im going to say £30 for it for a quick sale. That includes 1st class, recorded signed for delivery. Go for it!
Pins and a lanyard tube to fit can be supplied for an extra £5 (Both are brass and the pins are mosaic)
If you have any questions then please don't hesitate to ask!
SOLD
Alec
Last edited: