All great info guys - thank you
Today I wanted to knock up a box to store the battery, energiser and eventually a trickle charger etc. by the electric fence.
Please bear in mind I am more the agricultural big hammer type than a cabinet maker
Anyway sketched up some plans - no CAD CAM here
Sketch Plans by
British Red, on Flickr
Blessed my sliding chop saw when cutting a kit of parts
Kit of Parts by
British Red, on Flickr
...and a pillar drill for pre-drilling all the screw holes
Pre Drilled by
British Red, on Flickr
The frame went together okay
Frame by
British Red, on Flickr
Then used a jigsaw to cut a floor from 6mm exterior ply I had kicking about
Floor by
British Red, on Flickr
Then added sides and a back
Back and Sides by
British Red, on Flickr
Then a front and a pitched roof
Roof by
British Red, on Flickr
This is hinged on the back
Hinge by
British Red, on Flickr
and has a bolt on the front to stop it flapping in the wind
Bolt by
British Red, on Flickr
Opened up it'll give me space for a big Leisure battery, the energiser for the fence, a trickle charger and a socket.
Open by
British Red, on Flickr
I'll need to give it a couple of coats of varnish to fully weatherproof it and cut holes for the wires once its in place, but, whilst not pretty. it'll keep the weather out I think
Red