Well I’ve bit the bullet and finally made a bushcraft knife. It will be coming up for sale soon as it needs a little bit more finishing off.
52100 steel with a 3.7mm spine which will work with ferro rods. The angle of the grind is 27 degrees. With a stabilized birch burl handle with black G10 Liners.
![IMG_1078.jpeg IMG_1078.jpeg](https://bushcraftuk.com/community/data/attachments/73/73785-7255e2e48d30aad4c38f7f763b39babf.jpg)
![IMG_1077.jpeg IMG_1077.jpeg](https://bushcraftuk.com/community/data/attachments/73/73786-909a2ffba47bde902b5457d2b0db4870.jpg)
![IMG_1075.jpeg IMG_1075.jpeg](https://bushcraftuk.com/community/data/attachments/73/73787-89d091b21537f84979a8afc64db4a9f3.jpg)
52100 steel with a 3.7mm spine which will work with ferro rods. The angle of the grind is 27 degrees. With a stabilized birch burl handle with black G10 Liners.
![IMG_1078.jpeg IMG_1078.jpeg](https://bushcraftuk.com/community/data/attachments/73/73785-7255e2e48d30aad4c38f7f763b39babf.jpg)
![IMG_1077.jpeg IMG_1077.jpeg](https://bushcraftuk.com/community/data/attachments/73/73786-909a2ffba47bde902b5457d2b0db4870.jpg)
![IMG_1075.jpeg IMG_1075.jpeg](https://bushcraftuk.com/community/data/attachments/73/73787-89d091b21537f84979a8afc64db4a9f3.jpg)