Thread Size Help
- Thread starter keen-edge
- Start date
Its a standard threaded canister size (Fire maple, by the looks of it), and so is:
https://backpackinglight.com/canister_stove_faq/
You can get some canisters/stoves where the valve doesn't quite open enough because of the length of the tread (some Fire maple stoves via Alpkit had that problem a while back) but that should fit any standard canister you'd normally get.
https://en.wikipedia.org/wiki/EN_417
https://adventuresinstoving.blogspot.co.uk/2012/01/gas-canisters-101.html
https://backpackinglight.com/canister_stove_faq/
You can get some canisters/stoves where the valve doesn't quite open enough because of the length of the tread (some Fire maple stoves via Alpkit had that problem a while back) but that should fit any standard canister you'd normally get.
https://en.wikipedia.org/wiki/EN_417
https://adventuresinstoving.blogspot.co.uk/2012/01/gas-canisters-101.html
i mean the other side not the canister side the bit that screws into the stove its self buddy
No idea - I can dig one out, but the best thing is to look around for a description of a Fire maple stove
Last edited:
Thats what I meant.
Some talk here about FM stoves and modding: https://backpackinglight.com/forums/topic/72072/
and something more general here: https://bushwalkingnsw.org.au/clubsites/FAQ/MyStove3.htm
To be honest, I've never taken the hose out of the body of my stove, so I've never bothered to look at the fitting. There are fair number of modding forums, etc, and thats probably where your going to find the information, but its going to take time.
Some talk here about FM stoves and modding: https://backpackinglight.com/forums/topic/72072/
and something more general here: https://bushwalkingnsw.org.au/clubsites/FAQ/MyStove3.htm
To be honest, I've never taken the hose out of the body of my stove, so I've never bothered to look at the fitting. There are fair number of modding forums, etc, and thats probably where your going to find the information, but its going to take time.
Aye Up,
I think that is the same hose set as on a Vango stove that I bought some time back.
I will dig it out later today and see if I can find a nut to fit it to get you the size. Probably metric.
I think that is the same hose set as on a Vango stove that I bought some time back.
I will dig it out later today and see if I can find a nut to fit it to get you the size. Probably metric.
Aye Up keen-edge,
Apologies for the false hope but the hose end on the Vango I have is different.
Apologies for the false hope but the hose end on the Vango I have is different.
If you are anywhere near me you are welcome to use my thread gauges and micrometres. I'm sure we could work it out.
Cheers
Grebby
Cheers
Grebby
