Ok, found the one for the Solo stove itself but not the pot one. I've got loads of bags here won't be a problem finding a suitable bag. I tend to combine my gear and the stock bags get thrown to one side. And often lost over time.
Ok here you go. I assure you there is no issues with it at all, it will last you many years.
I'm sure they use stainless wires in the base. I can some very slight warping of one wire but not an issue. It's been used only a handful of times. Pot is perfect apart a little blacking, I don't scrub that off to hard no need, unless you just have to of course!
Some heat bluing of the stove as you'd expect.
Works well with a spirit burner too, Just pop it on something to lift it up.
These atre quite high resolution, unless the upload shrinks them. You should be able to zoom in for a closer perusal.
Edit; Oh that wavy effect on the bottom of the pot is reflection from the glass topped
table.
Edit 2; The flaky bits in the bottom is only ash by the way, not corrosion.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.