take an old can to the woods, harvest your resin, put it in the bottom of the can and add cold water.
Heat the can of water and pitch on your stove or campfire until it starts to simmer.
When the water comes to the boil let it simmer away and you'll notice the resin will come up to the surface of the water, it looks like cream.
DO NOT remove this until the pine aroma has gone, when you can't smell pine anymore, take the water off the boil this will have removed the aromatic compounds which cause the pitch to be runny.
Next take a stick and roll it in the pitch as if you were collecting candy floss. when you have a small amount on the stick dip the stick into cold water. Then re-introduce it to the resin, do this again and again until you end up with a resin stick.
all you need to do to use this is to reheat with boiling water or the heat of the fire.
Simple
Andrew and Carrie