Mora Knives
- Thread starter TheViking
- Start date
ChrisKavanaugh
Need to contact Admin...
The carbon Moras are one of the few knives that will readilly throw spark with natural flints ( after a little squaring and and roughening of the spine with a file,) a minor, but valid consideration in a survival kit. The laminated Frost Mora will also spark, but is attractive to some for it's edge performance. The stainless Moras have greater corrosion resistance. All of these versions are inexpensive and with factory edges more expensive brands don't want to discuss over emails 
. It's no wonder many outdoor schools find them excellent for instruction. The next step forward (?) is to 'upgrade' to a more robust blade of exotic steel and nicer cosmetics at 10 times the cost. This is well and good, makes for a healthy industry and fullfills all the intangible needs we have.
. It's no wonder many outdoor schools find them excellent for instruction. The next step forward (?) is to 'upgrade' to a more robust blade of exotic steel and nicer cosmetics at 10 times the cost. This is well and good, makes for a healthy industry and fullfills all the intangible needs we have.
The main concern with laminated is that it bends... and stays bent. Any significant lateral stress will bend your blade and you will have to hammer it back to true.TheViking said:Thank you both.Which one holds the best edge, the laminated or carbon? :wave:
That's the reason why I prefer the KJ Erikssons, even though they are "only" 60-61 RC, while the Frosts are a little harder.
Frost's clippers and military models (in triflex) don't have this problem, though. They are extremely tough.
Cheers,
David
The laminated will hold an edge longer if properly sharpened in the first place. Wood carvers use them to carve hard woods where they need extremely sharp edges. Carve a bit, strop on carboard and green buffing compound, carve - and so on.
The regular carbon Mora will hold an edge just fine for most outdoor stuff, though.
The regular carbon Mora will hold an edge just fine for most outdoor stuff, though.
Hi Guys
I actually deal in both companies the difference between the redhandle models is very slim at best and only with appearance in the end the factories actually stand next to each others i have been told within throwing distance. Both companies take great pride in their product and still operate on a personal basis. i can call the factory and if Jerker Eriksson is in he will take my call something you don't see hardly in the age of voice mail.
As far as the difference between Laminate and the carbon Jimbo is right the laminate does hold a better edge it seems to be able to graduate to that level of ridiculously sharp (meaning past hair shaving). The laminates are more flexible then the carbon but interesting I have bent a laminate and simply brought it back by leaning on it with wood and weight. That is to say it was a bowed bend and not a kink.
The frosts models in stainless and carbon are good model as of late I have been receiving a lot of good feedback on the Triflex model which is an odd bird itself.
Abe
I actually deal in both companies the difference between the redhandle models is very slim at best and only with appearance in the end the factories actually stand next to each others i have been told within throwing distance. Both companies take great pride in their product and still operate on a personal basis. i can call the factory and if Jerker Eriksson is in he will take my call something you don't see hardly in the age of voice mail.
As far as the difference between Laminate and the carbon Jimbo is right the laminate does hold a better edge it seems to be able to graduate to that level of ridiculously sharp (meaning past hair shaving). The laminates are more flexible then the carbon but interesting I have bent a laminate and simply brought it back by leaning on it with wood and weight. That is to say it was a bowed bend and not a kink.
The frosts models in stainless and carbon are good model as of late I have been receiving a lot of good feedback on the Triflex model which is an odd bird itself.
Abe
I have a laminated blade too - I use it a demo on courses - and I can actually bend the blade with thumb pressure alone.
Persoanlly I wouldnt reccomend this to anybody - the standard carbon blades are excellent however and hard to beat.
Persoanlly I wouldnt reccomend this to anybody - the standard carbon blades are excellent however and hard to beat.
Similar threads
