Hi all,
Im selling any of my knives, to buying others.
No trade at this time, please.
Cheers, Alfredo
Here we are:
1. Swamp Rat Chopweiler, used gently just once, as new, 225£ (shipping cost included), name and Swamp Rat brand say all, below some specs (from Knifetest.com):
Blade- Length is 7.5" from tip to handle. Thickness .25" Width 1.75" The grind starts .5" from spine and runs down blade to 1.2" from tip where it sweeps to the spine. A slight drop to the tip and a full belly makes this a very useful design up to many tasks. The blade cust very well for its thickness and shaves wood with remarkable ease. The choil is very large and comfy to use. It marries well to the handle and allows for precision use. The spine carries its full thickness to 1.2" from tip, where it gently narrows to a robust and powerful point.
Handle- Length is 5 5/8" With a generous swell to the rear that allow for powerful chops without you hand slipping. The handle is beautifully contoured with a narrower grip up front to allow control with choil, to comfy solid grip in the main, to thick rear which allows for grip all the way to the end giving that extra reach for increased chopping power. There is a slight rise off the front of the handle that allows control with your thumb while cutting and prevents slipping forward Well executed. my only complaint here is that i with the micarta slabs were thicker, but the handles width helps out here.
2. Fox Golok Hitam Machete, used not abused, 100£ (shipping cost included), great camp knife, here the specs from FKMD Knives
Blades:
Cobalt vanadium stainless steel N690Co HRC 58-60 long mm 225 thick mm 6. Handle: made with high resistant FORPRENE material, an elastopolymer with very high termal proprierties from -40°C to +150° C, it has very high grip power. The material is also very resistant to salt and acid corrosion and can be used in all wet situations. Total lenght of the handle is mm 135. Black and NATO green available.
Sheath:
each sheath is made with OD Green or Black ballistic nylon. The sheath has been designed under the supervision of Italian special forces. It has several different ways to can be carried. It can be fixed on plastic belts on the back pack, it can be fixed on the MOLLE systems, back side of the jackets, directly on the belt and so on. The sheath has also two extra nylon webbing straps that giving the possibility to can use the knife in all the ways and positions depending on the field in which the final user is involved.
Blade Coating:
The blade is coated with a DLC process. Is a special coating that gives to the outside blade a very hard resistant to salt corrosion and increase the outside hardening to HRC 72-75. This process have been developed for giving to these knives the same features of an high speed tool, long resistant to abrasions and very powerful performances.
Pics of actual:
3. J. Horrigan Model One, unused, 320£ (shipping cost included), John is a Mastersmith of USA, here the specs
5 1/2" sand-blasted 440c stain-resistant blade
10 1/4" overall length
303 stainless steel guard
Integral lanyard extension
Black micarta handle scales
Custom formed kydex sheath (tecklock not included)
Im selling any of my knives, to buying others.
No trade at this time, please.
Cheers, Alfredo
Here we are:
1. Swamp Rat Chopweiler, used gently just once, as new, 225£ (shipping cost included), name and Swamp Rat brand say all, below some specs (from Knifetest.com):
Blade- Length is 7.5" from tip to handle. Thickness .25" Width 1.75" The grind starts .5" from spine and runs down blade to 1.2" from tip where it sweeps to the spine. A slight drop to the tip and a full belly makes this a very useful design up to many tasks. The blade cust very well for its thickness and shaves wood with remarkable ease. The choil is very large and comfy to use. It marries well to the handle and allows for precision use. The spine carries its full thickness to 1.2" from tip, where it gently narrows to a robust and powerful point.
Handle- Length is 5 5/8" With a generous swell to the rear that allow for powerful chops without you hand slipping. The handle is beautifully contoured with a narrower grip up front to allow control with choil, to comfy solid grip in the main, to thick rear which allows for grip all the way to the end giving that extra reach for increased chopping power. There is a slight rise off the front of the handle that allows control with your thumb while cutting and prevents slipping forward Well executed. my only complaint here is that i with the micarta slabs were thicker, but the handles width helps out here.
2. Fox Golok Hitam Machete, used not abused, 100£ (shipping cost included), great camp knife, here the specs from FKMD Knives
Blades:
Cobalt vanadium stainless steel N690Co HRC 58-60 long mm 225 thick mm 6. Handle: made with high resistant FORPRENE material, an elastopolymer with very high termal proprierties from -40°C to +150° C, it has very high grip power. The material is also very resistant to salt and acid corrosion and can be used in all wet situations. Total lenght of the handle is mm 135. Black and NATO green available.
Sheath:
each sheath is made with OD Green or Black ballistic nylon. The sheath has been designed under the supervision of Italian special forces. It has several different ways to can be carried. It can be fixed on plastic belts on the back pack, it can be fixed on the MOLLE systems, back side of the jackets, directly on the belt and so on. The sheath has also two extra nylon webbing straps that giving the possibility to can use the knife in all the ways and positions depending on the field in which the final user is involved.
Blade Coating:
The blade is coated with a DLC process. Is a special coating that gives to the outside blade a very hard resistant to salt corrosion and increase the outside hardening to HRC 72-75. This process have been developed for giving to these knives the same features of an high speed tool, long resistant to abrasions and very powerful performances.
Pics of actual:
3. J. Horrigan Model One, unused, 320£ (shipping cost included), John is a Mastersmith of USA, here the specs
5 1/2" sand-blasted 440c stain-resistant blade
10 1/4" overall length
303 stainless steel guard
Integral lanyard extension
Black micarta handle scales
Custom formed kydex sheath (tecklock not included)
