I had some scrap 12c27 steel, oddly shaped but i could see a little cutter in there.
Handle, 9cm, stabilized Maple burl, there are a couple of natural inclusions in it that can be seen in the pictures, however all is solid.
6mm mosiac pins.
Black fibre liners.
Fileworked as seen.
Blade, 5cm, 2.5mm thick, steel 12c27 and is flat ground. 400 grit finish.
The blade does not have my mark on it.
There is no sheath but one can be made for an additional £20.00.
If like me you like to carve the skin from an apple and slice pieces of then you'll enjoy it.
Price £60.00 inclusive of postage.
Have a good day and thank you for looking.
Lance.
Handle, 9cm, stabilized Maple burl, there are a couple of natural inclusions in it that can be seen in the pictures, however all is solid.
6mm mosiac pins.
Black fibre liners.
Fileworked as seen.
Blade, 5cm, 2.5mm thick, steel 12c27 and is flat ground. 400 grit finish.
The blade does not have my mark on it.
There is no sheath but one can be made for an additional £20.00.
If like me you like to carve the skin from an apple and slice pieces of then you'll enjoy it.
Price £60.00 inclusive of postage.
Have a good day and thank you for looking.
Lance.
Last edited: