Search results

Hello, just finished this knife, and i thought i would post it here, not the usual bushcrafty content, but i thought you might like it! It's a short petty, 113mm blade, and 113mm handle. The blade is o2, and the handle is zebrano and bocote, the wedges are ash. The handle is octagonal, but...

Here is the latest to come out of the shop a smaller axe with good packability and control This axe was forged entirely by hand, and the haft handcarved from a locally sourced piece of ash. Here are some specifications: Edge length is 76mm (3") - total length is 375mm (14,8") - weight is 555...

Hello, this axe is now going up for sale, i did a work in progress on it over in the edged tools subforum (http://www.bushcraftuk.com/forum/showthread.php?t=141510) This axe was forged entirely by hand, and the haft handcarved from a locally sourced piece of ash. Here are some specifications...

Hello again, it's been a while, my journeymans test is now over, so i can concentrate a bit on axemaking again! Here is my latest in the making As forged: As it sits now after grinding and heat treatment: And a quick touch up on the edge to check for cracks: All good, now onto...

Hello again! I have yet to get bored of axemaking, and i am always finding myself coming back to the subject. Here is another one, the construction method is symmetrically wrapped with a medium-carbon edge bit! It started out as a piece of mild steel, with the dimensions 12x35x190mm, and a...

Hello again, i just finished this axe up, and thought i would show it to the world. The axe head is forged from mild steel with an edge of ck60, the handle is ash, the weight is 630 grams and the haft is ca. 460mm. Now i haven't yet sold any axes, but would like to, but before i ever sell an...

Hello, I made this axe (along many others) and decided it was time i tried myself with an axe mask. Leatherwork is not really my cup of tea, and so i made it as simple as i could, which worked out alright i think! I chose a stud button for the snap, also out of simplicity, i quite like...

Hi there! I am currently working on a slightly different axe, i have always wanted to make some larger axes, and so i thought i would give it a go! The starting material was 50x10x180mm mild steel, the cunstruction method was symmetric wrap with an 80crv2 edge insert! i started by forging...

Hello, Today is a holiday here in Denmark, it is the day of the danish constitution! So i had time to finish up this axe i have been working on the past week-nights! The head is forged as a symmetric wrap, with the body being mild steel and the edge being ck60 as usual! The head weight is...

Hello there! I posted this on a bladesmiths forum, but thought that you might like to see it as well: I took the plunge on a different approach to axe making today! I recently bought James Austins dvd on how to forge an asymetric axe head, and wanted to explore this method myself. However...

Did an axe head the other day, and thought i would throw it up here. The body is forged from 20x40x100mm mild steel, and the bit is ck60 This is as forged Tried out a new makers stanp i made, simple and subtle just as i like it! And did a shield shaped eye on this one, it suits...

Hello, i just finished these 2 knives. The blades are 52100 and flat ground. The handles are plum and yew, guard piece is brass. Let me know what you think: Peder Visti

Hello. I have these two little forged blades for sale... They are both forged from 52100 round stock, are flat ground with a blended convex edge and a lengthwise satin finish. Both have brass guards and are hidden tangs. the tangs protrude about 2/3 down the handle length. One handle is yew and...

Hello there, i finished this little one up the other day and tought i would show it here... It started out as 1" ck60 roundstock with the eye being slit and drifted... The handle is ash... It only weighs about 450 gram's (1lb) Peder Visti

Hello. I just got this knife finished up... It is forged from 52100 round stock, flat ground with a blended convex edge and a lengthwise satin finish. It has a brass and stainless guard, and is a hidden tang. the tang protrude about 2/3 down the handle length. The handle is masur birch...

Hello. I have these two forged blades for sale... They are both forged from 52100 round stock, are flat ground with a blended convex edge and a lengthwise satin finish. Both have brass guards and are hidden tangs. the tangs protrude about 2/3 down the handle length. One handle is natural elm...

Hello there, ive been away for a while redoing the shop and such. But im at it again with these sharp things. :rolleyes: This knife has an overall length of 209mm and a bladelength of 96mm The steel on this one is 4mm thick 80crv2 steel, with a 25 degree scandi grind (12,5 per side) The...

Hello again, i have got one more of these done up :) This knife has a 96mm blade of 3mm thick o2 toolsteel (very similar to o1) I left this knife with the dark finish as it came from the quench. Overall length is 209mm and it has a 12,5 degree scandi grind The handle is bog oak with stainless...

Hello again. You might have seen this knife in my recent thread in the edged tools forum. It has a 96mm blade of 3mm thick o2 steel (very similar to o1) the overall lenght is 208mm and it has a 12,5 degree scandi grind (25 degree inclusive). the handle is Bocote with stainless pins and it...

Hi, I was in need of a couple of different tools and thought the best way to get my hands on them would be to make them myself. So here goes: There is a bushcraft knife with bocote handle, a bearded axe with an ash haft, a small drawknife with oak handles and then a crook knife also with an...