Hi all,
I am selling this small knife I made recently. First time I've sold anything on BCUK so hopefully I've followed the process correctly!
I heat treated/ tempered then measured on my rockwell tester after each cycle. If interested these are the readings: after HT (810c)=68HRc then 1st temper @195c for 2hrs= 62HRc then a final temper @ 210c for 2hrs to achieve 59HRc (last photo below - although not the greatest shows the results).
The overall length is 165mm, blade is 55mm and finished with a polish surface.
Scales are white corian with red liners. Pins/lanyard hole are alloy.
No makers mark yet as my stamp has yet to arrive from the engravers.
I have made 2 sheaths for it. One is kydex and the other veg tan leather - reason for 2 is that I prefer carrying kydex in the field and like leather for appearance so I made both lol.
Looking for £35 which incl P&P.
Any questions just fire away![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Hope I have added the photos correctly! ...
![1.jpg 1.jpg](https://bushcraftuk.com/community/data/attachments/26/26000-b12198e670285f65cc634e003882404d.jpg)
![2.jpg 2.jpg](https://bushcraftuk.com/community/data/attachments/26/26002-a3e5139f1b9f317d1bec317362ea03d2.jpg)
![3.jpg 3.jpg](https://bushcraftuk.com/community/data/attachments/26/26001-0b11bc0e3bfe84df8a524122eb27eaa4.jpg)
![4.jpg 4.jpg](https://bushcraftuk.com/community/data/attachments/26/26003-d904f0dd91aef61e2b7d2f25c56bb60f.jpg)
![5.jpg 5.jpg](https://bushcraftuk.com/community/data/attachments/26/26004-decd6e2eb0716220e4cef9612c7424d8.jpg)
Cheers,
Rob
I am selling this small knife I made recently. First time I've sold anything on BCUK so hopefully I've followed the process correctly!
I heat treated/ tempered then measured on my rockwell tester after each cycle. If interested these are the readings: after HT (810c)=68HRc then 1st temper @195c for 2hrs= 62HRc then a final temper @ 210c for 2hrs to achieve 59HRc (last photo below - although not the greatest shows the results).
The overall length is 165mm, blade is 55mm and finished with a polish surface.
Scales are white corian with red liners. Pins/lanyard hole are alloy.
No makers mark yet as my stamp has yet to arrive from the engravers.
I have made 2 sheaths for it. One is kydex and the other veg tan leather - reason for 2 is that I prefer carrying kydex in the field and like leather for appearance so I made both lol.
Looking for £35 which incl P&P.
Any questions just fire away
Hope I have added the photos correctly! ...
![1.jpg 1.jpg](https://bushcraftuk.com/community/data/attachments/26/26000-b12198e670285f65cc634e003882404d.jpg)
![2.jpg 2.jpg](https://bushcraftuk.com/community/data/attachments/26/26002-a3e5139f1b9f317d1bec317362ea03d2.jpg)
![3.jpg 3.jpg](https://bushcraftuk.com/community/data/attachments/26/26001-0b11bc0e3bfe84df8a524122eb27eaa4.jpg)
![4.jpg 4.jpg](https://bushcraftuk.com/community/data/attachments/26/26003-d904f0dd91aef61e2b7d2f25c56bb60f.jpg)
![5.jpg 5.jpg](https://bushcraftuk.com/community/data/attachments/26/26004-decd6e2eb0716220e4cef9612c7424d8.jpg)
Cheers,
Rob