Broken tip on my Mora
- Thread starter Gleams
- Start date
-
Hey Guest, Early bird pricing on the Summer Moot (29th July - 10th August) available until April 6th, we'd love you to come. PLEASE CLICK HERE to early bird price and get more information.
Turn it into one of these?
http://www.axminster.co.uk/product.asp?pf_id=793242&name=mora&user_search=1&sfile=1&jump=44
Seriously, it depends on how confident you are re-profiling the blade. It can be done on an angle grinder / belt sander to rough it out then finish with hand files but you'll need to be very careful not to get it too hot or you'll ruin the temper.
Alot of work, might be best just to replace it.
http://www.axminster.co.uk/product.asp?pf_id=793242&name=mora&user_search=1&sfile=1&jump=44
Seriously, it depends on how confident you are re-profiling the blade. It can be done on an angle grinder / belt sander to rough it out then finish with hand files but you'll need to be very careful not to get it too hot or you'll ruin the temper.
Alot of work, might be best just to replace it.
forestwalker
Bushcrafter (boy, I've got a lot to say!)
If it is just a few mm make it into a small chisel (I saw Mors Kochanski with one like that once).
Easiest way is to bring the spine down to the existing edge with a mill file or with a hand held silicon carbide stone. Draw the file or stone carefully towards the (vise held) knife edge. Takes very little time.
I'd try the tanto point (chisel point). Kochanski did the same thing and found he liked the "tanto tip" on his mora. You might as well.
Similar threads
