Over 18s only.
Bushcraft knife made by Elma on here. Some discolouration on the blade and tang.
Yew handled utility blade made from 01 steel hardened to Rc 56/58. The blade is 41/2" long 3.5mm thick with a scandi grind, the handle is 4 3/4" long and very comfortable in hand. The Yew scales are treated with pentacryl, epoxied and pinned with 4x 4mm and 2x 8mm brass pins, the rear pin having a 6mm lanyard hole, the sheath is made from 3mm veg tanned leather with a belt loop to take a 2" wide belt, dyed dark brown and treated with Ko - cho - line leather dressing. The sheath could do with a wet formed refit as a little loose and does not hold when inverted.
A brilliant user that would look great if you were inclined to do a little work. Very pointy, sharp but not quite hairshaving
Any Q's just ask and ill do my best
£50 all in
Bushcraft knife made by Elma on here. Some discolouration on the blade and tang.
Yew handled utility blade made from 01 steel hardened to Rc 56/58. The blade is 41/2" long 3.5mm thick with a scandi grind, the handle is 4 3/4" long and very comfortable in hand. The Yew scales are treated with pentacryl, epoxied and pinned with 4x 4mm and 2x 8mm brass pins, the rear pin having a 6mm lanyard hole, the sheath is made from 3mm veg tanned leather with a belt loop to take a 2" wide belt, dyed dark brown and treated with Ko - cho - line leather dressing. The sheath could do with a wet formed refit as a little loose and does not hold when inverted.
A brilliant user that would look great if you were inclined to do a little work. Very pointy, sharp but not quite hairshaving
Any Q's just ask and ill do my best
£50 all in
Attachments
Last edited: