Same or much the same dimentions as the last one but now in red micarta (my first ever knife with the stuff)
Made with 1770 Uddelholm steel (0.7%C) deep quenched. Its 5.5 inches in total length with about 2inch of blade. The steel is 2.5mm thick and has been etched in ferric acid to give a slight opatina and to show the quench line. I used 6mm alu pins and a 6mm alu tube for the lanyard.
I was not sure how to finish off the micarta so I used some oil
£40
Made with 1770 Uddelholm steel (0.7%C) deep quenched. Its 5.5 inches in total length with about 2inch of blade. The steel is 2.5mm thick and has been etched in ferric acid to give a slight opatina and to show the quench line. I used 6mm alu pins and a 6mm alu tube for the lanyard.
I was not sure how to finish off the micarta so I used some oil
£40
