What angle to sharpen at?

[slammer187]

Here's a poll that I think everybody will find interesting,
Do you sharpen your knife such as a Mora or Woodlore at a:

10 degree angle on each side to make a 20deg edge,

15deg angle on each side to make a 30deg edge,

20deg angle on each side to make a 40deg edge,

25deg angle on each side to make a 50deg edge,

I'll let this thread run for a while before I give the proof
Please don't post and proofs or diagrams if you know the answer!
This will be interesting
Cheers,

EDIT: I can't seem to find a way to add a poll, can a mod or somebody please help

 

[robin wood]

I shall be interested to see what exactly you are going to prove. For me there is no right and wrong about sharpening there are many different right ways depending on the individuals preference, what they cut etc. Oh and of course the knife you start from makes a difference too so for instance I would sharpen a woodlore and mora in completely different ways. See this thread for the explanation of why. http://www.bushcraftuk.com/forum/showthread.php?t=29512&highlight=mora

 

[robevs73]

20 deg each side works best for me for a general purpose knife.

 

[British Red]

Also depends on if you are talking about a primary zero grind or the primary with a secondary or the secondary bevel?

 

[robevs73]

Also depends on if you are talking about a primary zero grind or the primary with a secondary or the secondary bevel?

good point. the 20deg bevels i use are zero grind.

 

[brancho]

I shall be interested to see what exactly you are going to prove. For me there is no right and wrong about sharpening there are many different right ways depending on the individuals preference, what they cut etc. Oh and of course the knife you start from makes a difference too so for instance I would sharpen a woodlore and mora in completely different ways. See this thread for the explanation of why. http://www.bushcraftuk.com/forum/showthread.php?t=29512&highlight=mora

Well put that man.
depends on the knife etc.

 

[Siberianfury]

i use a 24deg grind with a microbevel, that works very well for me.

 

[wilt]

I shall be interested to see what exactly you are going to prove. For me there is no right and wrong about sharpening there are many different right ways depending on the individuals preference, what they cut etc. Oh and of course the knife you start from makes a difference too so for instance I would sharpen a woodlore and mora in completely different ways. See this thread for the explanation of why. http://www.bushcraftuk.com/forum/showthread.php?t=29512&highlight=mora

I remember reading that thread a while back. It is definitely one of the most informational threads going.

:You_Rock_

Sincerely,
Mark