I make knives for a Hobby, and already sell a few on the 'https://www.thestalkingdirectory.co.uk' but as I have been a member on here for a few years now, I thought I would buy a 'maker' subscription and list a couple on here to see if there was any interest.
The blade steel is 80crv2 hardened to approximately 55 - 60 hrc (I always have one on my belt when around the farm and a quick strop is all it needs to bring the edge back), with black polyester handle scales and aluminum pins.
The sheath is approx. 3mm veg tan leather, dyed brown. the loop will accept a 2" belt.
The knife blade is 5" long, 3mm thick and roughly 25mm deep, with file work on the spine.
£130 inc P+P
The blade steel is 80crv2 hardened to approximately 55 - 60 hrc (I always have one on my belt when around the farm and a quick strop is all it needs to bring the edge back), with black polyester handle scales and aluminum pins.
The sheath is approx. 3mm veg tan leather, dyed brown. the loop will accept a 2" belt.
The knife blade is 5" long, 3mm thick and roughly 25mm deep, with file work on the spine.
£130 inc P+P
