Search results

Hi Guys been away from the community for far too long, hope everyone is keeping well in the mad times we are now living in. Best wishes Ian

Hi guys been away for a while, work and other things took over my life. I'm back in the woods got myself back into the countryside and bushcraft an to be honest my health is a lot better for it, these days I only hunt deer with a camera and my to spaniel pups keep me out in the woods. good to be...

got myself a new toy, an iphone 4 can anyone recommend bushcraft related apps Ian

slim genral purpose camp knife from O1 tool steel, flat ground with a polished finish. the handle is made from black acrylic with gold swirls and backed with blue fibre liners it has 2x6mm brass pins & a 3/8 mosaic lanyard tube Blade length 100mm, width 20mm & 4mm thick a veg tanned...

bushcraft knife made from O1 tool steel, flat ground bevels with a polished finish the handle is abalone fantasy marble (acrylic) backed with blue fibre liners, 2x6mm pins & a 3/8" lanyard tube Blade length 100mm, width 25mm and 4mm thick a sheath of veg tanned shoulder is being made for...

O1 utility knife with a bit of a nessmuk style to it Blade O1 with a high polish, length is 100mm & 35mm wide, its 4mm thick the handle is 115mm long and has scales of kassanda held in place with 25 x 1.7mm pins & a 6mm lanyard tube the sheath is 3mm veg tanned shoulder £60 inc UK...

little neck knife from O1 tool steel finished to a high polish, the handle is red stag antler backed with red fibre liners & a 6mm brass pin + a 6mm brass lanyard tube Blade length 75mm, width 28mm, & 3mm thick handle is 85mm long a 3mm veg tanned sheath is included £55 delivered

one I made for a lady hunter the blade is O1, 3 3/4" long with a 4" handle, the scales are G10 in hunter orange with 1/4" mosaic pins & 3/8" mosaic lanyard tube

Hi Guys well what can I say, its good to be back, 6 months away contracting, no BCUK no BB and living in scabby digs with no computer access, but there must be a god as iv'e now got a steady job back home. Before I start posting I must apologise to all those that were kind enougth to PM me...

Junkyard Bushy one of my first attempts at forging using my own charcoal bathtub forge, the blade is from a landrover leaf spring, the scales are from an old piece of tufnol rod the blade was tested with hardness files and comes out greater than Rc55 but less than Rc 60 and passed the brass...

mini nessmuk from O1 and buffalo horn Blade O1 86mm x 35mm 3mm, OAL 185mm, flat ground and polished the handle is of buffalo Horn backed with red fibre liners, with 16 x 1.7mm pins & a 6mm lanyard tube A sheath from 3mm veg tanned shoulder will be supplied with the knife £60 inc...

nice slim though comfortable knife from O1 and Burr oak Blade 115mm x 23mm x 3mm O1 flat ground and polished overall length 226mm Handle Burr Oak backed with black vulcanized fibre liners and 6mm brass pins and lanyard tube a pouch sheath made from 3mm veg tanned shoulder will be...

montana hunter the blade blank was purchased from Jantz Supplies in the US, it's made from AUS6 stainless steel hollow ground with a false edge and thumb notch on the spine, it has been cryo heat treated to give a tough edge of Rc 57 and satin finished. Blade length 95mm width 24mm...

Bushcraft blade from O1 Tool Steel highly polished and heat treated to Rc58/60, clothed in yew burr scales, backed with black vulcanised fibre liners the pins are 1/4" mosaic with a 3/8" mosaic lanyard tube Blade length 100mm width 24mm thickness 3mm handle length 120mm the sheath is...

Bushcraft blade from O1 Tool Steel highly polished and heat treated to Rc58/60, clothed in stabalized olivewood scales, backed with black vulcanised fibre liners the pins are 1/4" snowflake mosaic with a 3/8" mosaic lanyard tube Blade length 100mm width 24mm thickness 4mm...

little 3 finger necker from O1 and yew burl blade from O1 Tool steel with a polished finish and heat treated to Rc 58/60 Blade length,70mm width,20mm spine, 3mm handle is 85mm long with yew burr scales, & 4mm brass pin + 6mm brass lanyard tube will be supplied with 3mm veg tanned...

little nessmuk O1 with Buffalo Horn scales backed with red fibre liners & 16x 1.7mm brass pins & 6mm brass lanyard tube. Blade O1 with polished finished and treated to RC58/60 blade length, 86mm width 34mm spine 3mm Handle length 97mm I'm making a necker sheath of 3mm veg tanned...

nessmuk in O1 with Oak Burr scales backed with black fibre liners and 6mm brass pins Blade O1 with polished finesh and heat treated to Rc 58 Blade length 120mm width 54mm spine 4mm handle 115mm long sheath 3mm veg tanned shoulder I'm asking £75 inc postage & PP............SOLD...

nice little necker in O1 with tambootie scales, used this one onthe weekend to grallock a roe, the narrow blade made easy work of the back end. I have 2 of these for sale blade length 3" width 3/4" spine 3mm handle 4.25" with tambootie scales & 4mm brass pins £45ea inc postage...

O1 bush blade with a polished finish & cocobola scales backed with red fibre liners, pins are 1/4" snow flake mosaic with a 3/8" mosaic lanyard tube blade 4,3/4" long 1.2" wide 4mm spine handle is 4.5" long comes with 3.5mm veg tanned sheath with dangler fire steel...