1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

For Sale Mark Jacob Bushie with Baldric sheath.

Discussion in 'Makers Market' started by Stew, Jun 8, 2019.

  1. Stew

    Stew Bushcrafter through and through

    Joined:
    Nov 29, 2003
    Messages:
    5,145
    Likes Received:
    294
    Location:
    Aylesbury
    Blade is made by Mark from O1 steel with a scandi grind. It's 3mm thick steel, about 3 3/4" long blade.

    The handle is by me. The bolster section is desert ironwood. The rear section of handle is stabilised box burl with red G10 separting the two woods and also between the box burl and tang. Brass corby bolts and tube hold the handle on, along with epoxy resin.

    A Baldric carry sheath with more cord than needed so it can be shortened to suit.

    Cost is £140 delivered in the UK.

    [​IMG]


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]
     
    Dan1982 and Ettrick reiver like this.
  2. Mesquite

    Mesquite Anyone for sailing?

    Joined:
    Mar 5, 2008
    Messages:
    22,867
    Likes Received:
    572
    Location:
    ~Hemel Hempstead~
    Nice knife, you did a lovely job on the handle goodjob
     
  3. Dan1982

    Dan1982 Full Member

    Joined:
    Jan 14, 2006
    Messages:
    672
    Likes Received:
    29
    Location:
    Cardiff
    Stunning work as always!
     
  4. Stew

    Stew Bushcrafter through and through

    Joined:
    Nov 29, 2003
    Messages:
    5,145
    Likes Received:
    294
    Location:
    Aylesbury
    Thanks chaps.

    This is sold.
     

Share This Page